Karoq 2018 ➤ , Kodiaq 2017 ➤
1.6/85; 2.0/110; 130; 140 kW TDI CR engine - Edition 06.2017
Installation dimension for vehicles with marking on the exhaust
pipe
1 - Clamping sleeve
2 - Exhaust pipe
a - Installation dimension
A - Marking on the exhaust system
Installation dimension -a- for the clamping sleeve:
a - 8.5 mm.
Tightening torque of clamping sleeve
Varianta A - 25 Nm
Varianta B - 30 Nm
Tighten screwed connections uniformly.
1.9
Align exhaust tailpipes
Work procedure
– Align rear silencer in such a way that there is an equal distance
-a- and -b- between bumper opening and exhaust tailpipes.
– For centring the exhaust tailpipes, loosen the suspension of
the rear silencer.
400
Rep. gr.26 - Exhaust system
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�