Skoda Karoq 2018 Workshop Manual page 187

Repeat flushing steps 1-4 times, but always only pump approx. 1
litre of distilled water ⇒ page 174
with coolant.
Flushing the cooling system with coolant
– Connect suction hose -A- to container -2- with distilled water.
1. Flushing the cylinder block and cylinder head with coolant
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
– Close the bleeder hoses with hose clamps at the points indi‐
cated.
– Open the shut-off tap -A- on the valve block. The motor now
pumps coolant.
1.6/85; 2.0/110; 130; 140 kW TDI CR engine - Edition 06.2017
. Then flush the cooling system
Karoq 2018 ➤ , Kodiaq 2017 ➤
1. Cooling system, coolant
179