Skoda Karoq 2018 Workshop Manual page 272

Karoq 2018 ➤ , Kodiaq 2017 ➤
1.6/85; 2.0/110; 130; 140 kW TDI CR engine - Edition 06.2017
1.1.2 Summary of components - exhaust gas turbocharger with cooling
1 - Screw
❑ 15 Nm
2 - Heat shield
3 - Screw
❑ 9 Nm
4 - Coolant pipe
5 - Gasket
❑ Replace after disas‐
sembly
6 - Gasket
❑ Replace after disas‐
sembly
7 - Exhaust gas turbocharger
❑ Removing and installing
⇒ "1.2.2 Removing and
installing exhaust gas
turbocharger, exhaust
gas turbocharger with
cooling", page 274
❑ Replacing the pressure
tank
⇒ "1.3 Replacing ex‐
haust gas turbocharger
pressure box",
page 284
8 - Nut
❑ Replace after disas‐
sembly
❑ Tightening torque and
tightening order
⇒ page 266
9 - Screw
❑ Tightening torque and tightening order
10 - Exhaust gas temperature sender 1 - G235-
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
❑ Summary of components
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
⇒ "4.1 Summary of components - exhaust temperature regulation", page 455
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
❑ Removing and installing
❑ 45 Nm
11 - Mounting bracket
❑ for exhaust gas cleaning module
12 - Screw
Tightening torque and tightening order
13 - Gasket
❑ Replace after disassembly
14 - Oil return-flow line
15 - O-ring
❑ Replace after disassembly
❑ moisten with engine oil
264
Rep. gr.21 - Turbocharging/supercharging
⇒ page 265
⇒ "4 Exhaust temperature regulation", page 455
⇒ page 263