Skoda Karoq 2018 Workshop Manual page 247

– Push the screwdriver out of the engine compartment in direc‐
tion of arrow -B- between the catch arrow -A- and the catch
mechanism.
Note
When releasing the catch, take care to ensure that you do not
♦
break the mechanism.
Replace the release procedure on the left and right sides of
♦
the radiator.
– Turn the screwdriver slightly to release the catch.
– Push the radiator upwards into the engine compartment at the
same time.
– Pull the radiator downwards off the fixtures.
– Remove coolant radiator from the charge air cooling circuit
radiator.
– Remove radiator downwards.
Installing
Installation is carried out in the reverse order. Pay attention to the
following:
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
Note
If there is light prints on the fins, follow the instructions
♦
⇒ "3.5 Assembly of radiators and condensers", page 7
Check the O-rings for damage, if necessary replace.
♦
– Insert the radiator into the bottom support. The radiators must
lock together. Check the catches by pulling in the opposite di‐
rection.
– Install fan shroud
⇒ "4.6 Removing and installing fan shroud", page 250
– Connect coolant hose with quick coupling
NOTICE
If a new radiator has been fitted, the cooling system must be
flushed and the coolant must be replaced to ensure optimum
protection of the surface
⇒ "1.4 Flushing the cooling system", page 167
If the existing radiator is fitted:
– Top up coolant ⇒ page 165
Specified torques
♦ ⇒ "4.1 Assembly overview - radiator/radiator fan", page 230
♦ ⇒ "4.2 Summary of components - fan shroud and radiator fan",
page 234
♦ ⇒ General body repairs, exterior; Rep. gr. 50 ; Lock carrier;
Summary of components - lock carrier .
4.4.2 Removing and installing radiator, Karoq
Special tools and workshop equipment required
1.6/85; 2.0/110; 130; 140 kW TDI CR engine - Edition 06.2017
⇒ page 233
.
.
Karoq 2018 ➤ , Kodiaq 2017 ➤
.
.
.
4. Coolers, radiator, radiator fan
239