Table of Contents
Advertisement
Available languages
Available languages
Gimbal Mode Button
Tap the button to switch to different
working mode.
PF (Pan Follow)
Default mode, tilt and roll axis are both locked, camera is
able to move to left or right smoothly.
PTF (Pan and Tilt Follow)
Roll axis is locked, camera is able to move left/right and
tilt up/down.
L (All Locked)
The camera stays in its current orientation.
POV (All Follow and Inception)
All Follow – Tilt axis, roll axis and pan axis all follow the
movement of the gimbal.
Inception – Hold the gimbal horizontally and push
joystick to left or right.
Long press for six seconds to enter offline
calibration.
Calibrating the gimbal is required only when
you notice that the gimbal is not level or drifts
on any of the axes.
9
- Quick Links:
- App Download
- Firmware Upgrade
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the iSteady Pro 4 and is the answer not in the manual?
Questions and answers
Hi, I have since 2 years a Hohem iSteadt Pro4 gimball. Always satisfied to use it. But now, after a longer inactivity, the battery is after 2 minutes empty. What can I do ?
To address quick battery drain after inactivity on the Hohem iSteady Pro 4 gimbal, make sure the gimbal is fully charged before first use, which takes about 3.5 hours. Also, turn off the gimbal when not in use to prevent unnecessary battery drain.
This answer is automatically generated