Hohem iSteadyPro 4 User Manual

Hohem iSteadyPro 4 User Manual

Splashproof 3-axis action camera gimbal

Advertisement

Quick Links

Splashproof 3-Axis Action Camera Gimbal
User Manual
V1.0
For more tutorial videos
please scan YouTube QR code

Advertisement

Table of Contents
loading

Summary of Contents for Hohem iSteadyPro 4

  • Page 1 Splashproof 3-Axis Action Camera Gimbal User Manual V1.0 For more tutorial videos please scan YouTube QR code...
  • Page 2 DISCLAIMER Thank you for purchasing the Hohem product.By using this product, you hereby signify that you have read this disclaimer and warning carefully and that you understand and agree to abide by the terms and conditions herein. You agree that you are solely responsible for your own conduct while using this product, and for any consequences thereof.
  • Page 3: Product Overview

    Product Overview ❻ ❼ Tilt 320° ❶ ⓭ ❾ ❽ Roll 320° ⓮ ❷ ❿ Pan 600° ⓯ ❸ ⓫ ⓰ ❹ ⓱ ⓬ ❺ ⓲ 1/4 Inch Extension Screw Hole ❶ Mini USB DC Out ❿ Mode Indicator ❷ 1/4 Inch Extension Screw Hole ⓫...
  • Page 4: Accessories List

    For More Interesting Functions * Scan QR code to download the app. * Hohem Gimbal supports iOS 9.0 and Android 5.0 or later. * Search for'Hohem Gimbal' in the App Store or Google Play and follow the instructions to install the app.
  • Page 5 Gimbal Charging Charge the gimbal fully before using it for the first time. The battery takes approximately 3.5 hours to fully charge. * USB Port: Power bank output * Type C Port: Gimbal charging port * Mini USB DC Out : Action camera charging port (Supported to charge camera while working) * Tap the power button to check...
  • Page 6 Mounting the Action Camera * Do not turn on the gimbal without an action camera mounted on. Pull the quick release clip (spring) and snap it into the groove to secure the camera. If the power button or charging port is blocked, please adjust the direction of motor axis after installing the camera as shown above.
  • Page 7 Operation Instruction ❶ ❹ ❷ ❺ ❸ ❻ ❼ ❶ Joystick ❹ Bluetooth Indicator Light On: Gimbal is connected with Push Up/Down phone Bluetooth Tilt Control Flash Twice: Power On/Off Push Left/Right Light Off: Gimbal is disconnected with Pan Control phone Bluetooth ❷...
  • Page 8 Gimbal Mode Button Tap the button to switch different working modes with light on. PF (Pan Follow) Default mode, tilt & roll axis both locked, camera is able to move to left or right smoothly. PTF (Pan & Tilt Follow) Roll axis locked, camera is able to move to left/right, and tilt up/down.
  • Page 9 Camera Connection/Remote Control Indicator *iSteady Pro 4 exclusive remote control is non standard purchase. For remote control pairing and instructions please see the user manual of remote control . Camera Connection/Remote Control Indicator PAIR Button (Camera Connection) Light Off No any connection Keep Flashing Double-click the PAIR button to Green Light...
  • Page 10: Bluetooth Connection

    App "Hohem Gimbal" Instruction Bluetooth Connection 1. Enable the Bluetooth on the smartphone. 2. Launch the app, choose the product model and connect to the gimbal. (Please only enable the phone Bluetooth and connect Bluetooth in the app) ❶ ❷...
  • Page 11 App "Hohem Gimbal" Instruction Other App Features 1. Gimbal Specs Setting: A. Following Speed (To adjust the following speed of pan/tilt/roll axis) B. Joystick Speed (To adjust the rotating speed by control the joystick) C. Dead Zone (No following movement when the rotate angle is less than dead area setting) D.
  • Page 12 Calibration It requires to calibrate the gimbal if you notice it is not work properly as below. 1. The pitch angle is not level with the horizontal surface. 2. The roll angle is not parallel to the horizontal surface. 3. The pan axis drifts when the gimbal is on all lock mode. Calibration Instruction Method 1: Off-line Calibration (1) Power on the gimbal, long press the mode button over 6 seconds till the...
  • Page 13: Firmware Upgrade

    Firmware Upgrade Please make sure the gimbal is connected with the Hohem Gimbal app via Bluetooth successfully, and upgrade to the latest firmware in the app. Q: Why does the gimbal vibrate after powering on? 1. Make sure to mount the camera before powering on the gimbal.
  • Page 14: Specifications

    Specifications Weight 365g include battery Main Material High performance composite Payload 150g GoPro Hero 10/9/8/7/6/5/4/3, DJI OSMO Action, Insta360 ONE R (4K & 1-Inch), SONY RX0 Compatible and other action cameras Cameras with similar size and weight. Max Camera Size: Height: 51mm;...
  • Page 15: Warranty Card

    Warranty Card Disclaimer and Warning Within 15 days upon the purchase date. Any functional disorder or quality problem enjoys free replacement service. But ensure the commodity and package with no damage, and we will offer a brand new replacement after confirming the product problem. Warranty valid only under normal use.

Table of Contents