Calibration Instructions; Firmware Upgrade - Hohem iSteady Pro 4 User Manual

Calibration
Calibrating the gimbal is required only if you encounter any of the following problems:
The pitch angle is not level with the horizontal surface.
•
The roll angle is not parallel to the horizontal surface.
•
The pan axis drifts when the gimbal is on all-lock mode.
•

Calibration Instructions

Method 1: Offline calibration
Power on the gimbal, long press the mode button for six seconds until the
•
Bluetooth indicator stays on.
Lay the gimbal on a flat surface without any vibration. Calibration is completed
•
once the Bluetooth indicator flashes twice.
If the offline calibration doesn't work, please refer to the following method.
Method 2: 6-Side calibration using the app
First, make sure the gimbal is connected with the app via Bluetooth. Then enter the
"Calibration" menu and follow the instructions in the app to calibrate the gimbal.

Firmware Upgrade

Please make sure the gimbal is connected with the Hohem Gimbal app via Bluetooth
successfully, and upgrade to the latest firmware in the app.
13