Hohem iSteady Pro 4 User Manual page 12

Other app features
Gimbal-specific settings
Follow speed
•
To adjust the following speed of pan/tilt/roll axes.
Joystick speed
•
To adjust the rotating speed of the controller joystick.
Dead zone
•
Do not follow the movement when the rotate angle is less than configured dead zone.
Trim
•
Adjust the tilt/roll axes in small angle.
Joystick reverse
•
Reverse the rotation direction of the controller joystick.
Motor options
•
To adjust the motor torsion of pan/tilt/roll axes, which is useful to solve the vibrate issue
due to lightweight or overweight action camera.
Camera options
•
Enable/disable charging output of gimbal mini-USB port. Camera control options.
Firmware update
The firmware update is subject to upgrade without a fixed schedule. Firmware upgrade
helps to optimize the work of the gimbal. Please refer to "Firmware Update" for more
details.
Calibration
Calibrating the gimbal is required only when you notice that the gimbal is not level or
drifts on any of the axes.
12