Alliance Laundry Systems DCG Series Installation Operation & Maintenance
  1. Manuals
  2. Brands
  3. Alliance Laundry Systems Manuals
  4. Washer/Dryer
  5. DCG Series
  6. Installation operation & maintenance
Alliance Laundry Systems DCG Series Installation Operation & Maintenance

Alliance Laundry Systems DCG Series Installation Operation & Maintenance

Washer-extractors
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Washer-Extractors
Cabinet Hardmount
Design 4, 6, and 7 Machines
Refer to Page 9 for Machine Identification
Original Instructions
Keep These Instructions for Future Reference.
CAUTION: Read the instructions before using the machine.
(If this machine changes ownership, this manual must accompany machine.)
Part No. F8619501ENR11
www.alliancelaundry.com
September 2022

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DCG Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Alliance Laundry Systems DCG Series

Summary of Contents for Alliance Laundry Systems DCG Series

  • Page 1 Washer-Extractors Cabinet Hardmount Design 4, 6, and 7 Machines Refer to Page 9 for Machine Identification Original Instructions Keep These Instructions for Future Reference. CAUTION: Read the instructions before using the machine. (If this machine changes ownership, this manual must accompany machine.) Part No.

  • Page 3: Regulatory Statements

    Users of this product are cautioned not to make modifications or firmware-limited to Channel 1 through 11. changes that are not approved by Alliance Laundry Systems, LLC. Doing so may void the compliance of this product with ap- CANADA - CAN ICES-3(B)/NMB-3(B) plicable laws and regulatory requirements and may result in the loss of the user’s authority to operate the equipment.

  • Page 4: Manufacturing Date

    The user must stop operating the device immediately should harmful interference is caused and shall not resume until © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 5: China Restriction Of Hazardous Substances (Rohs)

    NOTE: The referenced Environmental Protection Use Period Marking was determined according to normal oper- ating use conditions of the product such as temperature and humidity. This product under normal use, durable years of environmental protection is 15 years. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 6: Safety Information

    Read all instructions before using the washer. times [preferably in a locked cabinet]. • Install the washer according the INSTALLATION instruc- tions. Refer to the EARTH/GROUND instructions in the IN- © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 7: Safety Decals

    Use manufacturer-authorized spare parts to avoid safety hazards. Any problems or conditions not understood should be reported to the dealer, distributor, service agent or the manufacturer. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 8: Operator Safety

    Do not bypass any safety devices in the machine. WARNING Operating the machine with severe out-of-balance loads could result in personal injury and serious equipment damage. W728 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 9: Table Of Contents

    Input Power Conditioning................75 © Copyright 2022, Alliance Laundry Systems LLC All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher.
  • Page 10 Emergency Stop Button (OPL Models Only) ..........105 Maintenance ..................107 Daily......................107 Beginning of Day..................107 End of Day....................107 Monthly..................... 107 Yearly......................109 Care of Stainless Steel................. 110 Disposal of Unit...................112 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 11: Introduction

    HCE020NV HCG020WF HCH020WY HCT020NC HCT020WT HCD020NF HCE020NX HCG020WH HCJ020FN HCT020ND HCT020WV HCD020NH HCE020NY HCG020WL HCJ020NC HCT020NE HCT020WX HCD020NL HCE020WC HCG020WT HCJ020ND HCT020NF HCT020WY Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 12 UCT020QN UCU020NN UCA020NN UCD020QN UCH020FN UCJ020FN UCK020QN UCU020FN UCA020QN UCG020FN UCH020NN UCJ020NN UCT020FN UCU020QN UCD020FN UCG020NN UCH020QN UCJ020QN UCT020NN CH020E-A CH020F-A CH020M-A CH020N-A CH020S-A CH020T-A © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 13 HCE030NV HCG030WF HCH030WY HCT030NC HCT030WT HCD030NF HCE030NX HCG030WH HCJ030FN HCT030ND HCT030WV HCD030NH HCE030NY HCG030WL HCJ030NC HCT030NE HCT030WX HCD030NL HCE030WC HCG030WT HCJ030ND HCT030NF HCT030WY Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 14 UCT030QN UCU030QN UCA030NN UCD030QN UCG030QN UCJ030FN UCK030QN UCU030FN UCA030QN UCE030FN UCH030FN UCJ030NN UCT030FN UCU030NN UCD030FN UCG030FN UCH030NN UCJ030QN UCT030NN CH030E-A CH030F-A CH030M-A CH030N-A CH030S-A CH030T-A © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 15 PCK040NC PCK040WL PCL040QN PCT040NL PCT040WY PCA040QN PCG040NE PCK040NH PCK040WX PCL040WC PCT040NX PCA040WC PCG040NF PCK040NL PCK040WY PCL040WH PCT040NY PCA040WH PCG040NH PCK040NX PCL040NC PCL040WL PCT040QN Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 16 UCG040QN UCH040QN UCJ040QN UCT040FN UCU040FN UCA040NN UCG040FN UCH040FN UCJ040FN UCK040NN UCT040NN UCU040NN UCA040QN UCG040NN UCH040NN UCJ040NN UCK040QN UCT040QN UCU040QN CH040E-A CH040F-A CH040M-A CH040N-A CH040S-A CH040T-A © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 17 PCK060NC PCK060WL PCL060QN PCT060NL PCT060WY PCA060QN PCG060NE PCK060NH PCK060WX PCL060WC PCT060NX PCA060WC PCG060NF PCK060NL PCK060WY PCL060WH PCT060NY PCA060WH PCG060NH PCK060NX PCL060NC PCL060WL PCT060QN Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 18 UCG060QN UCH060QN UCJ060QN UCT060FN UCU060FN UCA060NN UCG060FN UCH060FN UCJ060FN UCK060NN UCT060NN UCU060NN UCA060QN UCG060NN UCH060NN UCJ060NN UCK060QN UCT060QN UCU060QN CH060E-A CH060F-A CH060M-A CH060N-A CH060S-A CH060T-A © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 19 PCK080NC PCK080WL PCL080QN PCT080NL PCT080WY PCA080QN PCG080NE PCK080NH PCK080WX PCL080WC PCT080NX PCA080WC PCG080NF PCK080NL PCK080WY PCL080WH PCT080NY PCA080WH PCG080NH PCK080NX PCL080NC PCL080WL PCT080QN Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 20 UCG080FN UCH080FN UCJ080FN UCK080NN UCT080NN UCU080NN UCA080NN UCG080NN UCH080NN UCJ080NN UCK080QN UCT080QN UCU080QN UCA080QN UCG080QN UCH080QN UCJ080QN UCT080FN UCU080FN CH080E-A CH080F-A CH080M-A CH080N-A CH080S-A CH080T-A © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 21 PCK100NC PCK100WL PCL100QN PCT100NL PCT100WY PCA100QN PCG100NE PCK100NH PCK100WX PCL100WC PCT100NX PCA100WC PCG100NF PCK100NL PCK100WY PCL100WH PCT100NY PCA100WH PCG100NH PCK100NX PCL100NC PCL100WL PCT100QN Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 22 UCG100FN UCH100FN UCJ100FN UCK100NN UCT100NN UCU100NN UCA100NN UCG100NN UCH100NN UCJ100NN UCK100QN UCT100QN UCU100QN UCA100QN UCG100QN UCH100QN UCJ100QN UCT100FN UCU100FN CH100E-A CH100F-A CH100M-A CH100N-A CH100S-A CH100T-A © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 23: Delivery Inspection

    Alliance Laun- dry Systems at +1 (920) 748-3950 for the name and address of the nearest authorized parts distributor. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 24: Specifications And Dimensions

    [mm] Height of door opening above 17.0 [432] 17.0 [431] 17.7 [451] 18.1 [460] 21.7 [551] 21.7 [551] floor, in. [mm] Table 1  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 25 5.79 [2.63] 6.84 [3.10] 10°F/lbs. [10°C/kg] Average consumption per cy- 0.78 [59] 0.98 [75] 1.34 [102] 1.58 [120] cle, BHP [kgf m] Table 1  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 26 HIGH 2.368 3.693 2.394 3.269 2.643 3.031 10°F [5.5°C] Noise Emissions Wash Extract (100G) 56 Extract (200G) 61 N/A = Not Applicable Table 1 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 27: Machine Dimensions

    Specifications and Dimensions Machine Dimensions Front View CHM2563N_SVG Figure 2 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 28 26.0 [660] 29.0 [737] 30.6 [777] 34.1 [866] 41.5 [1054] 41.5 [1054] 1.1 [28] 1.1 [28] 1.1 [28] 1.1 [28] 1.1 [28] 1.1 [28] Table 2 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 29 Specifications and Dimensions Side View CHM2564N_SVG Figure 3 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 30 9.3 [236] 9.3 [236] 9.3 [236] 9.3 [236] 9.3 [236] Door width 16.75 [426] 19.38 [492] 21.75 [552] 21.75 [552] 25.25 [641] 25.25 [641] Table 3 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 31 5. Compartment Cold Fill Valve 6. Compartment Hot Fill Valve 7. Cold Hard Water Valve or 3rd Water Inlet 8. Pump Drain View Figure 4 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 32 2.0 [51] 2.0 [51] 18.1 [460] 21.1 [536] 20.7 [526] 23.7 [602] 23.1 [587] 26.1 [663] 39.4 [1001] 41.4 [1052] 35.6 [904] 37.5 [953] Table 4 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 33 6. Compartment Cold Fill Valve 7. Compartment Hot Fill Valve 8. Cold Hard Water Valve or 3rd Water Inlet 9. Pump Drain View Figure 5 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 34 40.3 [1024] 38.0 [965] 4.5 [114] 8.8 [224] 17.0 [432] 2.0 [51] 22.8 [579] 25.4 [645] 27.7 [704] 39.7 [1008] 43.6 [1107] 43.5 [1105] Table 5 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 35 6. Tub Hot Fill Valve 7. Steam Valve 8. Compartment Cold Fill Valve 9. Compartment Hot Fill Valve 10. Cold Hard Water Valve or 3rd Water Inlet Figure 6 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 36 46.3 [1176] 52.6 [1336] 52.6 [1336] 42.4 [1077] 49.7 [1262] 49.7 [1262] 46.3 [1176] 53.6 [1361] 53.6 [1361] 42.4 [1097] 49.7 [1262] 49.7 [1262] Table 6 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 37: Mounting Bolt Hole Locations - 20 And 30 Models

    Mounting Bolt Hole Locations – 20 and 30 Models 20-30 Models (refer to Table 7 ) CHM2609N_SVG 1. Elevated Base Width 2. Front of Mounting Bolt Template 3. Machine Width Figure 7 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 38 0.113 [3] 0.188 [5] 23.938 [608] 28.938 [735] 24.69 [627] 29.69 [754] 27.95 [710] 32.38 [597] 26 [660] 29 [737] 0.641 [16] 0.641 [16] Table 7 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 39: Mounting Bolt Hole Locations - 40 And 60 Models

    Mounting Bolt Hole Locations - 40 and 60 Models 40 and 60 Models (refer to Table 8 ) 1. Elevated Base Width 2. Front of Mounting Bolt Template 3. Machine Width Figure 8 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 40 1.187 [30] 1.25 [32] 32.5 [826] 36 [914] 33.54 [852] 36.87 [699] 37.36 [949] 40.7 [1034] 30.6 [777] 34.1 [866] 0.641 [16] 0.641 [16] Table 8 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 41: Mounting Bolt Hole Locations - 80 And 100 Models

    “A”. For multiple machines installed side by side with minimum clearance, use the inside bolt holes marked “B”. 1. Front of Mounting Bolt Template Figure 9 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 42 4 [102] 4 [102] Outside 42.72 [1085] 42.72 [1085] Inside 35.43 [900] 35.43 [900] Outside 52.86 [1342] 52.86 [1342] Inside 47.16 [1197] 47.16 [1197] Table 9 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 43: Installation

    If the slab meets these requirements and an elevated pad is desired, refer to Figure 20 and proceed to Machine Mounting and Grouting. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 44: Foundation And Pad Installation

    20-3 80-1 stallation based on consultations with a structural en- Description gineer. Alliance Laundry Systems stands behind all in- stallations meeting these specifications. For alternate Required thick- 4 [102] 4 [102] 6 [152] 6 [152] installation specifications based on your soil type, lo-...

  • Page 45: Floor Layout And Pad Dimensions

    Dimensional Clearances - Single Machine Mount - 20-60 Pound [9.1-27.2 Kg] Models, in. [mm] Description Distance to wall (minimum) 24 [610] 24 [610] 24 [610] 24 [610] Table 12  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 46 Dimensional Clearances - Side-by-Side Mount - 20-60 Pound [9.1-27.2 Kg] Models (refer to Table 13 ) CHM2505N_SVG 1. Wall 2. Rear Edge of Pad 3. Machine 1 4. Machine 2 5. Front Edge of Pad Figure 12 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 47 Width of pad (minimum) 57.54 [1462] 63.52 [1613] 67.38 [1711] 78.98 [2006] Side clearance between ma- .5 [13] .5 [13] .5 [13] .5 [13] chines Table 13 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 48 5.26 [134] 6.19 [157] 8.9 [226] edge of pad (minimum) Length of pad (minimum) 88.63 [2251] 98.37 [2499] 115.23 [2927] 119.48 [3035] Table 14  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 49 15 ) CHM2519N_SVG 1. Wall 2. Rear Edge of Pad 3. Side Edge of Pad 4. Machine 1 5. Front Edge of Pad Figure 14 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 50 Distance of machine base to edge of pad (minimum) 8 [203] Length of pad (minimum) 49.2 [1250] Width of pad (minimum) 57.5 [1461] Table 15 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 51 Distance to wall (minimum) 24 [610] Adjacent unit spacing (minimum) 6 [152] Length of pad (minimum) 49.2 [1250] Width of pad (minimum) 99.5 [2527] Table 16 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 52 10.38 [264] Length of pad (minimum) 49.2 [1250] Width of pad (minimum) 99.5 [2527] IMPORTANT: When close mounting, bolt machine using inside bolt holes. Table 17 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 53 Back-to-Back Mount - 80 and 100 Pound [36.3 and 45.4 Kg] Models, in. [mm] Description 80-100 Adjacent rear spacing (minimum) 33.3 [846] Table 18  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 54 8 [203] 8 [203] 8 [203] 8 [203] 12 [305] vation Depth V-speed 8 [203] 8 [203] 12 [305] 12 [305] 15 [381] Table 19 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 55: Foundation Requirements

    New Monolithic Floor (refer to Table 21 ) PHM981N_SVG 1. Edge of Pad 2. 3500 PSI (minimum) Concrete 3. Compacted Fill (minimum 6 in. [152 mm] beneath machine) Figure 19 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 56 9 [229] Total depth of foundation (con- 10 [254] 10 [254] 12 [305] 15 [381] crete plus 6 in. [152 mm] fill) (minimum) Table 21 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 57 15 [381] crete plus 6 in. [152 mm] fill) (minimum) Required thickness of existing 4 [102] 4 [102] 6 [152] 9 [229] floor (minimum) Table 22 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 58 12 [305] bars (minimum) Length of reinforcing bar ex- 2.5 [64] 2.5 [64] 2.5 [64] 2.5 [64] tending into existing floor (mini- mum) Table 23 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 59: Machine Mounting And Grouting

    Grout completely under frame. Remove front panel and back panel to gain access to entire perimeter of base plates. Force grout under base until all voids are filled. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 60 Cast-in-place Anchors (refer to Table 24 ) CHM2438N_SVG 1. Machine Frame Base 2. Grout 3. Anchor Bolt (minimum Grade 5 SAE rating) 4. Concrete 5. Edge of Pad Figure 23 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 61 4330 [5.87] chine base, lbs.-ft. [kN-m] Maximum vertical load, lbs. 800 [3.56] 1130 [5.03] 1460 [6.49] 2060 [9.16] 3090 [13.75] 3160 [14.06] [kN] Table 25 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 62: Drain Connection Requirements

    1. Rear of Machine 2. Drain Pipe 3. Steel Grate 4. Drain Trough 5. Strainer 6. Waste Line 7. 1 in. [25 mm] minimum gap Figure 24 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 63 5.7 [161] 8.0 [221] 9.5 [269] * Also works with 3 inch OD PVC pipe if connected to inside of drain tee connector. Table 26 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 64: Drain Hose Models - Connect Drain Hose To Drain Receptacle

    9.4 [35.5] 5 ft. [1.5 m] 7.6 [28.8] 6 ft. [1.8 m] 6.6 [25.1] 7 ft. [2.1 m] 5.6 [21.2] 8 ft. [2.4 m] 4.3 [16.4] © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 65 Suitable air cushions (risers) should be installed in supply lines to 60-100 prevent “hammering.” Refer to Figure 26 . (WRAS- ap- Alliance Laundry Systems, LLC ranges of front loading commer- proved mod- cial clothes washing machines have solenoid valves at the inlets. els) The water supply to the washing machines is supplied with an AB air gap between the soap tray and the drum.

  • Page 66: Connect Inlet Hoses (20-40 Models)

    NOTE: No more than three (3) water connection hoses are required. should be used on WRAS-approved models. Figure 27 Figure 28 Connect Inlet Hoses (20-40 Models) © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 67: Connect Inlet Hoses With Y-Connectors (60-100 Models)

    If additional hose lengths are needed or using hoses other than those supplied by manufacturer, flexible hoses with screen filters are required. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 68 9. Cold Water Supply Faucet 10. Y-connection 11. Filter Screen (screen must be facing outward, toward water supply) 12. Blue Fill Hose (cold) Figure 30 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 69: Plumbing Diagrams

    Installation Plumbing Diagrams 20-60 Models - Side View (refer to Table 29 ) Figure 31 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 70 Installation 20-60 Models - Rear View (refer to Table 29 ) CHM2641N_SVG 1. Vacuum Breaker Overflow Figure 32 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 71 33.9 [861] 35.8 [909] 38.0 [965] Vaccum breaker overflow centerline 35.5 [902] 37.5 [953] 39.7 [1008] Inlet Valves 38.9 [988] 41.4 [1052] 43.2 [1097] Table 29 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 72 Installation 60-100 Models - Side View (refer to Table 30 ) Figure 33 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 73 Installation 60-100 Models - Rear View (refer to Table 30 ) 1. Vacuum Breaker Overflow Figure 34 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 74: Electrical Installation Requirements

    Only qualified personnel should attempt adjustments and troubleshooting. Disconnect power from the ma- IMPORTANT: Alliance Laundry Systems warranty does chine before removing any cover and guards, and not cover components that fail as a result of improper before attempting any service procedures.

  • Page 75: Input Power Conditioning

    North American Approval and CE Approval sections for model- 220-240V from a 380-415V source, connect L1 and N. specific circuit breaker requirements. Refer to Figure 35 . © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 76: Single-Phase Connections

    Standard IEC 60335-1, clauses 24.3 and 22.2. Gap is defined as the minimum contact sepa- ration of each pole in the switch between the “ON” and “OFF” positions. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 77: Grounding

    Do not connect customer power or customer load to the Internal Load Distribution ter- minal block. Refer to the machine electrical schemat- ic for details. W759 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 78: North American Approval

    440-480 50-60 Electric Heat V-Speed Models 200-240 200-240 200-240 50- 60 Electric Heat 200-240 50- 60 Standard 380-415 50- 60 Electric Heat Table 32  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 79 Installation 20 Models - North American Approval Voltage Designation Specifications Standard 440-480 50- 60 Electric Heat Table 32 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 80 440-480 50- 60 V-Speed Models 200-240 200-240 200-240 50-60 Electric 200-240 50-60 Heat Standard 380-415 50-60 Electric Heat Standard 440-480 50-60 Electric Heat Table 33 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 81 Electric Heat V-Speed Models 200-240 200-240 200-240 50-60 Electric 200-240 50-60 10.0 Heat Standard 380-415 50-60 Electric Heat Standard 440-480 50-60 Electric Heat Table 34 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 82 50-60 Electric Heat V-Speed Models 200-240 50-60 11/7 Electric 200-240 50-60 10.0 Heat Standard 380-415 50-60 Electric Heat Standard 440-480 50-60 Electric Heat Table 35 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 83 200-240 50-60 15/9 20/15 12/14 4/2.5 Electric 200-240 50-60 25.0 Heat Standard 380-415 50-60 Electric 10.0 Heat Standard 440-480 50-60 Electric 10.0 Heat Table 36 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 84 200-240 50-60 16/10 20/15 12/14 4/2.5 Electric 200-240 50-60 25.0 Heat Standard 380-415 50-60 Electric 10.0 Heat Standard 440-480 50-60 Electric 10.0 Heat Table 37 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 85: Ce Approval

    Electric Heat 440-480 50-60 V-Speed Models 200-240 200-240 200-240 50-60 Electric Heat 200-240 50-60 17- 20 Standard 380-415 50-60 Electric Heat 440-480 50-60 Table 38 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 86 50-60 V-Speed Models 200-240 10/6 200-240 10/6 200-240 50-60 10/6 Electric Heat 220-240 50-60 17- 20 Standard 380-415 50-60 Electric Heat 440-480 50-60 Table 39 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 87 10/6 200-240 10/6 200-240 50-60 10/6 Electric Heat 200-240 50-60 33- 39 10.0 Standard 380-415 50-60 Electric Heat Standard 440-480 50-60 Electric Heat Table 40 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 88 V-Speed Models 200–240 50-60 11/7 16/ 10 Electric Heat 200-240 50-60 33- 39 10.0 Standard 380-415 50-60 Electric Heat Standard 440-480 50-60 Electric Heat Table 41 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 89 200-240 50-60 17/ 11 20/ 16 Electric Heat 200-240 50-60 59- 70 16.0 Standard 380-415 50-60 Electric Heat Standard 440-480 50-60 Electric Heat Table 42 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 90 200-240 50-60 17/ 11 20/ 16 Electric Heat 220-240 50-60 59- 70 16.0 Standard 380-415 50-60 Electric Heat Standard 440-480 50-60 Electric Heat Table 43 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 91: Steam Requirements (Steam Heat Option Only)

    The chemical supply connector is located on the back right-hand side of the machine. There are 12 chemical ports on the connec- © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 92 Connection for Chemical Supply Hoses (refer to Figure 42 for detail of chemical supply connector) C-CHM1N1_SVG1 1. Chemical Supply Connector 2. External Liquid Supply Connection Ports (12) Figure 41 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 93 NOTE: A flush manifold system can only be connected through the top 6 ports (boxed). 1. 3/4 inch port, O.D. 2. 1/2 inch port, O.D. 3. 3/8 inch port, O.D. Figure 42 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 94: External Supplies

    © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 95: Chemical Injection Using External Ac Power Source

    NOTE: An External AC Power Source is NOT provided by Alliance Laundry Systems. NOTE: Power for external supplies must not be derived from the high-voltage main power connection point. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 96: External Supply Signals

    Figure 49 control. Refer to Figure 49 for Internal Supply Connection or and Figure 51 for External AC Connection. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 97 1. ES1 Power supply 2. K12 Contact 3. Supply 1 Signal Figure 50 1. ES1 Power supply 2. K12 Contact 3. Supply 1 Signal Figure 51 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 98: Start Up

    1. If rotation is not counter clockwise, disconnect power to ma- chine. 2. Have a qualified electrician reverse any two motor leads at the motor. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 99: Operation

    4. Close the door and turn handle counter clockwise. Refer to Figure 54 . © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 100: Opl Control Instructions

    5. When a cycle is complete, the control displays 00. 5. When a cycle is complete, the control displays OPEN DOOR. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 101 3. Press the START (enter) keypad to select. NOTE: Cycles cannot be changed anytime after the machine is started. 4. When a cycle is complete, the control displays OPEN DOOR. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 102: Vend Control Instructions

    6. When a cycle is complete, the control displays OPEN DOOR. 6. When a cycle is complete, the control displays OPEN DOOR. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 103: Dcj, Hct, Sch And Sct Models With N And W Controls

    © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 104: Sct Modles With Q Control

    • Powder - Compartment 2 • Liquid - Compartment 1 (prewash) + Compartment 3 c. Softener: • Powder - Compartment 1 (prewash) + Compartment 2 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 105: Adding Supplies

    CHM2228N_SVG 1. Liquid Detergent 2. Powder Detergent b. BLEACH CHM2229N_SVG CHM2230N_SVG 3. Liquid Bleach 4. Powder Bleach c. SOFTENER CHM2231N_SVG 5. Liquid Softener Table 45 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 106: Emergency Stop Button (Opl Models Only)

    1. Press red emergency stop button to stop all action. 2. To restart the machine, pull red emergency stop button out and press START (enter) on the control. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 107: Maintenance

    5. Shut off water supply. chine should not start. b. Close the door without locking it and start the machine. The machine should not start. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 108: Monthly

    An SAE 40 rating is also acceptable as long as the cSt or SUS values are within the specified ranges. Pump the grease gun slowly, permitting only 2 strokes. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 109: Yearly

    3. Remove any accumulated debris on or near the motor and er belt gauge (refer to Table 47 ) is obtained mid-span. motor variable frequency drive heat sinks, if applicable. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...
  • Page 110 IMPORTANT: All torque joints must remain dry (non- lubricated). 12. Every 5 years replace inlet hoses, hose screens, belt, and fan filter (if applicable). © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 111: Care Of Stainless Steel

    Locate the pump and tubing below the machine’s injection point to prevent siphoning of chemicals into the machine. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

  • Page 112: Disposal Of Unit

    MIX1N_SVG Figure 67 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR11 DO NOT COPY or TRANSMIT...

This manual is also suitable for:

Dcj seriesBca seriesBcg seriesBck seriesBcl seriesBct series ... Show all

Table of Contents