Symbols Used In This Manual; Symbols On The Power Tool; For Your Safety - Flex DGE 8-32 Original Operating Instructions

Contents
Symbols used in this manual . . . . . . . . . 14
Symbols on the power tool . . . . . . . . . . 14
For your safety . . . . . . . . . . . . . . . . . . . 14
Noise and vibration . . . . . . . . . . . . . . . . 18
Technical specifications . . . . . . . . . . . . 19
Overview . . . . . . . . . . . . . . . . . . . . . . . . 20
Operating instructions . . . . . . . . . . . . . . 21
Maintenance and care . . . . . . . . . . . . . . 22
Disposal information . . . . . . . . . . . . . . . 23
Declaration of Conformity . . . . . . . . 23
Declaration of Conformity . . . . . . . . . 24
Exemption from liability . . . . . . . . . . . . . 24

Symbols used in this manual

WARNING!
Denotes impending danger. Non-
observance of this warning may result in
death or extremely severe injuries.
CAUTION!
Denotes a possibly dangerous situation.
Non-observance of this warning may result
in slight injury or damage to property.
NOTE
Denotes application tips and important
information.

Symbols on the power tool

To reduce the risk of injury,
read the operating instructions!
Wear goggles!
Wear ear protection!
Disposal information for the
old machine (see page 11)!
14

For your safety

WARNING!
Before using the power tool, please read
and follow:
these operating instructions,
-
the "General safety instructions" on the
-
handling of power tools in the enclosed
booklet (leaflet
the currently valid site rules and the
-
regulations for the prevention of
accidents.
This power tool is state of the art and has
been constructed in accordance with the
acknow-ledged safety regulations.
Nevertheless, when in use, the power tool
may be a danger to life and limb of the user
or a third party, or the power tool or other
property may be damaged. The power tool
may be operated only if it is
as intended,
-
in perfect working order.
-
Faults which impair safety must be repaired
immediately.
Intended use
The straight grinder DGE 8-32 is designed
- for commercial use in industry and trade,
- for metalworking,
- for grinding, cutting, polishing, milling
and working with wire brushes.
Safety instructions
WARNING!
Read all safety instructions and other
instructions. Failure to observe the safety
instructions and other instructions may
result in an electric shock, fire and/or serious
injuries . Keep all safety instructions and
other instructions in a safe place for the
future.
This power tool is to be used for grinding,

sanding, wire brushing, polishing, milling
and as a cutting tool. Observe all safety
information, instructions, diagrams and
data which you receive with the power
tool. If you do not observe the following
instructions, an electric shock, fire and/or
serious injuries may occur.
DGE 8-32
no. 315.915),
-