Safety Warning Labels / Serial Number - Schwinn 230 Assembly Manual

WARNING!
• Injury or death is possible if
caution is not used while using
this machine.
• K eep children and pets away.
• Read and follow all warnings
on this machine.
• Refer to the Owner's Manual
for additional warnings and
safety information.
• The heart rate displayed is an
approximation and should be
used for reference only.
• Not intended for use by
anyone under 14 years of age.
• T he maximum user weight
for this machine is 300 lbs
(136kg).
• This machine is for home use
only.
• Consult a physician prior to
using any exercise equipment.
(The label on the machine is available in
English and French Canadian only.)
This product complies with the European Radio Equipment Directive 2014/53/EU.
FCC Compliance
Changes or modifications to this unit not expressly approved by the party responsible for compliance
!
could void the user's authority to operate the equipment.
The machine and power supply comply with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Note: This machine and power supply have been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
UNLESS OTHERWISE SPECIFIED:
1. ALL ITEMS MUST BE RoHS COMPLIANT However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
2. ALL DIMENSIONS APPLY BEFORE PLATING OR COATING.
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
3. REMOVE ALL BURRS, BREAK SHARP EDGES 0.5 MM MAX.
4. ALL MACHINES SURFACES Ra 3.2 uM.
on, the user is encouraged to try to correct the interference by one or more of the following measures:
5. ALL APPLICABLE NAUTILUS STANDARDS AND
SPECIFICATIONS APPLY.
• Reorient or relocate the receiving antenna.
6. ALL DIMENSIONS ARE IN MILLIMETERS
7. ALL DUAL DIMENSIONS ARE IN INCH
• Increase the separation between the equipment and receiver.
This document is the property of Nautilus, Inc. It may not be reproduced in whole or part, provided to third parties, or used for any purposes other than the performance of work
• C onnect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• C onsult the dealer or an experienced radio/TV technician for help.
SAFETY WARNING LABELS AND SERIAL NUMBER
METRIC
THIRD ANGLE
PROJECTION
WARNING!
• Keep hands
•
and feet away.
•
54.8mm
Serial Number
Product
specification
TOLERANCES.
X. 2.5
X.X
1.5
X.XX
0.75
X.XXX
0.25
ANGULAR
1°
INTERPRET DIMENSIONS AND TOLERANCES
PER ASME Y14.5M - 1994
APPROVALS
D.LOVELY
7-22-10
- -
5