Table of Contents
Advertisement
2. Overview
Figure 2-3 Front and back views of the HELIOS BS4850-SH battery module
Table 2-1 Explanation of the connection port symbols
No.
Indicator/Port
1
SOC (status of charge)
2
Alarm
3
Run
4
Reset
5
ADD
6
RG45
7
Switch
8
RS485
9
48V port
10
Function
Green light showing status of charge of the battery
Red light indicates there is a fault in the battery
Green light indicates the battery is in normal operation.
Keep pushing this button for 3 seconds to reset the BMS
Keep pushing this button for 6 seconds to switch on/off the
battery
4 ADD switches (Dip1, 2, 3, 4) to define a mater battery and slave
batteries. A master battery can manage up to 15 slave batteries.
To set a correct address for each battery module, please refer to
chapter XX.
Communication port to connect with external devices e.g. PC for
upgrading the BMS software
To turn on/off the battery
Communication terminal to connect the battery modules and
BMS
DC input/output terminal
HELIOS CUBE BS4850-SH
Helios New Energy Technology (Australia) Pty Ltd
User Manual
Advertisement
Table of Contents
