Assembly - RADLEY 5125-017 Owner's Manual

ASSEMBLY

UNPACKING
Unpack all parts and lay them on a flat, stable surface.
1.
Remove all packing materials.
2.
Make sure the delivery contents are complete and free of any damage. If
3.
you find that parts are missing or show damage do not use the product and
contact Customer Service @ 1-866-349-8665. Using an incomplete or
damaged product represents a hazard to people and property.
Ensure that you have all the accessories and tools needed for assembly and
4.
operation. This also includes suitable personal protective equipment.
WARNING: The mower must be fully assembled before operation! Do
not use a product that is only partly assembled or assembled with
damaged parts!
Follow the assembly instructions step-by-step and use the pictures
provided as a visual guide to easily assemble the product!
Do not connect the product to battery power before it is completely
assembled!
NOTE: Take care of small parts that are removed during assembly or when
making adjustments. Keep them secure to avoid loss.
LOWER HANDLEBAR
Align the mounting hole of the lower handlebar (5/14) with the mounting
1.
hole of handle support (Fig. 3, step 1).
Attach the washer (3a) to the bolt and secure the lower handlebar (5/14) by
2.
turning the knob (3) clockwise for tightening (Fig. 3, step 2).
Make sure that the control cord (18) aligns on the upper side of the lower
3.
handlebar (right) (14).
15
14
18
1
2
3
3a
40V Max* Lawn Mower
5
2
3
3a
FIG.3
Owner's Manual