Table of Contents
Advertisement
ASSEMBLY
UNPACKING
Unpack all parts and lay them on a flat, stable surface.
1.
Remove all packing materials and shipping devices if applicable.
2.
Make sure the contents are complete and free of any damage. If you find
3.
that parts are missing or show damage do not use the product but contact
Customer Service @ 1-866-349-8665. Using an incomplete or damaged
product represents a hazard to people and property.
Ensure that you have all the accessories and tools needed for assembly and
4.
operation. This also includes suitable personal protective equipment.
WARNING: The product must be fully assembled before operation! Do
not use a product that is only partly assembled or assembled with
damaged parts!
Follow the assembly instructions step-by-step and use the pictures
provided as a visual guide to easily assemble the product!
Do not connect the product to a power source before it is completely
assembled!
NOTE: Take care of small parts that are removed during assembly or when
making adjustments. Keep them secure to avoid loss.
LOWER HANDLE BARS
Align and pass the mounting hole of the lower handlebar through the bolt of
1.
handle support (Fig. 1).
Attach the washer to the bolt and secure the lower handlebar by turning the
2.
lever (1) up for tightening.
Make sure that the control cord runs up the upper side of the lower
3.
handlebar (right) .
1
FIG.1
5125-015
12
Advertisement
Table of Contents
