Maintenance - RADLEY 5125-017 Owner's Manual

MAINTENANCE

WARNING: Always switch the product off, remove the battery packs and
the safety key and let the product cool down before performing inspec-
tion, maintenance and cleaning work!
Keep the product clean. Remove debris from it after each use and before
1.
storage.
Regular and proper cleaning will help ensure safe use and prolong the life of
2.
the product.
Inspect the product before each use for worn and damaged parts. Do not
3.
operate it if you find broken and worn parts.
WARNING: Only perform repairs and maintenance work according to
these instructions! All further works must be performed by a qualified
specialist!
GENERAL CLEANING
Clean the product with a dry cloth. Use a brush for areas that are hard to reach.
1.
Remove stubborn dust with high pressure air (max. 40 PSI).
2.
NOTE: Do not use chemical, alkaline, abrasive or other aggressive detergents or
disinfectants to clean this product as they might be harmful to its surfaces.
Check for any damage and wear. Repair damages in accordance with this
3.
instruction manual or take it to an authorised service centre before using the
product again.
UNDERBODY AND CUTTING BLADE
WARNING: Wear safety gloves when working on the blade and close to
it! Use proper tools to remove debris, e.g. a wooden stick! Never use
your bare hands!
Always use original spare parts for replacement. Do not attach any other
type of cutting blade! The replacement of the cutting blade should be
done by a qualified specialist!
Keep the underbody and cutting blade clean and free of debris. Remove
1.
clippings from the rear discharge chute.
Check all fasteners, such as nuts and bolts, periodically for tightness before
2.
operation. After prolonged use, especially in sandy soil conditions, the
cutting blade will become worn and lose some of the original shape. The
cutting efficiency will be reduced and the cutting blade should be replaced.
23
40V Max* Lawn Mower
Owner's Manual