Siemens SITRANS WS300 Operating Instructions Manual page 10

Installing/mounting
3.4 Mounting to a tail pulley
Dimensions in mm (inch)
① Angle bracket slotted for arrestor rod
② Tension spring (supplied)
Note
• Distance (d) is the take up travel on the tail pulley.
• When adjusting the belt take up, ensure there is play on the arrestor rod. If the arrestor
rod is pushed against the end of its travel slot, premature wear may result on the bearing.
10
③ Arrestor rod (cut to suit)
④ Flexible conduit
Operating Instructions, 04/2021, A5E45050935-AC
SITRANS WS300