Table of Contents
Advertisement
3.2 Modifying IP Address
Set the IP address for the network segment to allow the Camera to access the network.
Step 1
Log in to the Camera web interface.
Step 2
Select Setup > Network > TCP/IP.
Step 3
Configure IP related parameters.
Click Save.
Step 4
3.3 Live Video
The web interface might differ depending on the device. Figures in this guide are for reference only.
Step 1
Log in to the web interface of the Camera.
The default username is admin, and the password is the one that was set during
initialization.
Click Login, and then the system will display the home page.
Step 2
Figure 3-2 TCP/IP
5
Advertisement
Table of Contents
