Modifying The Ip Address - Dahua N53AB52 Quick Installation Manual

Set and confirm the password of the devices, and then enter a valid email address. Click
Next.
Select the options according to your needs and then click OK.
Click Finish.

Modifying the IP Address

Modify the IP address of one or multiple devices at one time. This section provides

instructions for modifying IP addresses in batch.
Modifying IP addresses in batch is available only when the corresponding devices have

the same login password.
Follow steps 1 through 4 in the section above to initialize the device and to search for
devices in your network segment. Ensure the username and password are the same as
set during the device initialization.
Select the devices whose IP addresses need to be modified, and then click Modify IP.
Select Static mode and enter start IP, subnet mask, and gateway.
IP addresses of multiple devices will be set to the same if you select Same IP.

If DHCP server is available in the network, devices will automatically obtain IP addresses

from DHCP server when you select DHCP.
9