Table of Contents DEVICE INSTALLATION ..................1 Installation Preparation ......................... 1 1.1.1 Check installation space and intension ..................1 1.1.2 About cable ............................1 SETUP BEFORE INSTALLATION ..............2 Check Accessories ..........................2 Cable Description ..........................2 Reset and SD Card Installation ......................2 INSTALLATION....................
Page 3
Welcome Thank you for purchasing our thermal hybrid dome! Please read the following safeguards and warnings carefully before you install or use the product!
Important Safeguards and Warnings Safety Measures 1. Qualified Engineer Needed The installation engineer or maintenance engineer shall have corresponding CCTV system installation certificate or maintenance qualification certificate. The installation engineer or maintenance engineer shall have qualification certificate for work at height.
Page 5
electromagnetic field. Violent vibration or crash is not allowed during transportation and application. Before you connect the cable, install or uninstall, or begin the daily maintenance work, please turn off the power and unplug the power cable. Please make sure the produce is secure firmly on the wall or the ceiling. 10.
Page 6
This series product shall be away from the strong electromagnetism radiant, please keep it away from wireless power, TV transmitter, transformer and etc. 7. Daily Maintenance Please use the soft cloth to clean dust on the shell, or you can use soft cloth with cleaning liquid to clean the shell and then use soft cloth to make it dry.
1 DEVICE INSTALLATION 1.1 Installation Preparation 1.1.1 Check installation space and intension Please make sure the installation environment has enough space to install the thermal hybrid dome and its corresponding bracket. Please make sure the ceiling, wall and the bracket can support the thermal hybrid dome and its corresponding installation component.
2 SETUP BEFORE INSTALLATION 2.1 Check Accessories Before the installation, please check the accessories one by one according to the packing list. Please make sure all the components listed are included. 2.2 Cable Description There is one multi-functional composite cable by default for the thermal hybrid dome, please refer to Figure 2-1 for more details.
3 INSTALLATION The intelligent thermal imaging thermal hybrid dome adopts four installation modes which are wall mount, hang mount, corner mount and pole mount. Attention: The installation surface should meet the following installation conditions: The installation surface is thick enough to install expansion bolt. ...
It has to heat and shrink the heat-shrinkable tube on both sides after the video head is well connected, which is to guarantee the video head is moistureproof and waterproof. Step 4 Put the cable into the wall-mounted bracket and fix the thermal hybrid dome on the bracket by using stainless screws, as it is shown in Figure 3-2 (4).
Pull the cable through the connecting pole, twine the Teflon tape around the connecting pole and fix it on the connection tray, as it is shown in Figure 3-4 (2). Step 3 Refer to the step 2 to 4 in “3.1 Wall Mount Installation” and install the thermal hybrid dome on the bracket.
Step 1 Dig holes on the installation wall, insert expansion bolts, fix with nut and paste glass cement to make it sealed and waterproof, as it is shown in Figure 3-6 (1). Step 2 Refer to the step 2 to 4 in “3.1 Wall Mount Installation” and install the thermal hybrid dome on the bracket.
Page 14
84mm~108mm, φ80mm~130mm, φ130mm~152mm, φ155mm~178mm, φ180mm~203mm, φ194mm~216mm; It is optional according to the users’ requirements; the special size is customizable as well. Figure 3-8 Step 1 Fix the installation hold hoop and the pole-mount bracket on the pole and paste glass cement to make it sealed and waterproof, as it is shown in Figure 3-8 (1).
4 Network Configuration 4.1 Modify IP Address IP address can be acquired and modified through quick configuration tool for the thermal hybrid dome, please refer to the << Quick Configuration Tool Operation Manual>> for more details. Note: Currently the quick configuration tool only supports the cameras which apply to the same network segment with computer IP address.
Figure 4-2 4.2 Login WEB Interface Note: Different devices may have different WEB interfaces, the figures below are just for reference, please refer to the <<WEB Operation Manual>> in the disk and the actual interface for more details Step 1 Open IE and input the modified camera IP address in the address bar. Step 2 The login interface is shown below, please input your user name and password (Default user name is admin and password is admin respectively), click “login”.
Page 17
Figure 4-3 Step 3 Install controls according to the system prompt; see Figure 3-4 for the WEB main interface. Please modify the administrator password as soon as possible after you successfully logged in. Figure 4-4...
5 APPENDIX Ⅰ LIGHTENING PROTECTION AND SURGE PROTECTION This series thermal hybrid dome adopts TVS lighting protection technology. It can effectively prevent damages from various pulse signals below 4000W, such as sudden lighting and surge. While maintaining your local electrical safety code, you still need to take necessary precaution measures when installing the thermal hybrid dome in the outdoor environment.
Page 19
Figure 5-1 Note This manual is for reference only. Slight difference may be found in the user interface. All the designs and software here are subject to change without prior written notice. All trademarks and registered trademarks are the properties of their respective owners.