Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Dahua TPC-SD8621-B25Z45
Summary of Contents for Dahua TPC-SD8621-B25Z45
- Page 1 Thermal Hybrid Speed Dome Quick Start Guide Version 1.0.0...
-
Page 2: Table Of Contents
Table of Contents CYBERSECURITY RECOMMENDATIONS ............. IV PACKING LIST ....................1 DEVICE STRUCTURE ..................2 Device External Cable .......................... 2 Structure Dimension ..........................3 DEVICE INSTALLATION ..................6 Installation Preparation ......................... 6 3.1.1 Check Installation Space and Intension ..................6 3.1.2 About cable ............................ - Page 3 APPENDIX Ⅰ LIGHTENING PROTECTION AND SURGE PROTECTION ..18...
- Page 4 Welcome Thank you for purchasing our thermal hybrid speed dome! Please read the following safeguards and warnings carefully before you install or use the product!
-
Page 5: Cybersecurity Recommendations
Cybersecurity Recommendations Mandatory actions to be taken towards cybersecurity 1. Change Passwords and Use Strong Passwords: The number one reason systems get “hacked” is due to having weak or default passwords. It is recommended to change default passwords immediately and choose a strong password whenever possible. - Page 6 You do not need to forward any ports for individual cameras if they are all connected to a recorder on site; just the NVR is needed. 7. Disable Auto-Login on SmartPSS: Those using SmartPSS to view their system and on a computer that is used by multiple people should disable auto-login.
- Page 7 Ideally, you want to prevent any unauthorized physical access to your system. The best way to achieve this is to install the recorder in a lockbox, locking server rack, or in a room that is behind a lock and key. 15.
- Page 8 Important Safeguards and Warnings Safety Measures 1. Qualified Engineer Needed The installation engineer or maintenance engineer shall have corresponding CCTV system installation certificate or maintenance qualification certificate. The installation engineer or maintenance engineer shall have qualification certificate for work at height.
- Page 9 electromagnetic field. Violent vibration or crash is not allowed during transportation and application. Before you connect the cable, install or uninstall, or begin the daily maintenance work, please turn off the power and unplug the power cable. Please make sure the produce is secure firmly on the wall or the ceiling. 10.
- Page 10 This series product shall be away from the strong electromagnetism radiant, please keep it away from wireless power, TV transmitter, transformer and etc. 7. Daily Maintenance Please use the soft cloth to clean dust on the shell, or you can use soft cloth with cleaning liquid to clean the shell and then use soft cloth to make it dry.
-
Page 11: Packing List
1 Packing List Please check if there is any obvious damage to the device appearance when opening the packing box, and confirm if the accessories in the box are in accordance with those on the list. Please refer to Table 1-1 for more details about the list. Accessory Name Quantity Thermal Hybrid Speed Dome... -
Page 12: Device Structure
2 Device Structure 2.1 Device External Cable Note The following figure is for reference only, which is only used to know the function of cable ports. The cable structure may be different according to different devices, please refer to the actual device for more details. -
Page 13: Structure Dimension
Port Cable port name Function description Alarm output port 1, output alarm signal to alarm ALARM_OUT1 device. Note ALARM_OUT1 can only be used with ALARM_COM1 ALARM_COM1 when connecting to alarm device. Alarm output port 2, output alarm signal to alarm ALARM_OUT2 device. - Page 14 Figure 2-2 Please refer to Figure 2-3 for the dimension of wall-mounted bracket. The unit is mm (inch). Figure 2-3 Please refer to Figure 2-4 for the dimension of hang-mounted bracket. The unit is mm (inch). Figure 2-4 Please refer to Figure 2-5 for the dimension of corner-mounted bracket. The unit is mm (inch). Figure 2-5...
- Page 15 Please refer to Figure 2-6 for the dimension of pole-mounted bracket. The unit is mm (inch). Figure 2-6...
-
Page 16: Device Installation
3 Device Installation 3.1 Installation Preparation 3.1.1 Check Installation Space and Intension Please make sure the installation environment has enough space to install the thermal hybrid speed dome and its corresponding bracket. Please make sure the ceiling and wall where the device is installed can support the thermal hybrid dome and its corresponding installation component. -
Page 17: Installation Steps
Figure 3-1 Note Press the reset button for 4s~5s and then it can realize device factory default settings. Step 2 Insert the SD card into the slot, the card slot is elastic, so you only need to press the SD card slightly to install the SD card. - Page 18 Step 1 Fix the device on the wall. 1. Dig holes on the mounting wall, fix the expansion bolt, and tighten the hex nut, as it is shown in Figure 3-2 ①. 2. Twist the quick mounting connector into the wall-mounted bracket and use stainless screws to fix it, which is shown in Figure 3-2 ②.
-
Page 19: Hang-Mounted Installation
Figure 3-3 1. Keep the convex groove outward and install the rubber ring into the network port, keep the smaller hole of the rubber ring outward and install the fixing rubber ring into the main body of the waterproof connector. 2. -
Page 20: Corner-Mounted Installation
2. Pull the cable through the connection pole, twine the Teflon tape around the connection pole and fix it on the connection tray, as it is shown in Figure 3-4 ②. 3. Twist the quick mounting connector into the wall-mounted bracket, use stainless screws to fix, buckle the safety hook, connect cable and use insulated tape to make it waterproof, which is shown in Figure 3-4 ③. -
Page 21: Pole-Mounted Installation
3. Buckle the safety hook, connect cable and use insulated tape to make it waterproof. Pull the cable into the wall-mounted bracket and use stainless screws to fix the speed dome on the bracket. Caution Please make sure the safety hook is installed, otherwise the thermal hybrid dome may fall and cause accident due to instability! Please refer to the safety hook installation instruction in the accessories bag for more details. - Page 22 1. Fix the mounting hoop and pole-mounted bracket on the pole, and paste glass cement on it to make it sealed and waterproof, which is shown in Figure 3-6 ①. 2. Twist the quick mounting connector into the wall-mounted bracket and use stainless screws to fix it.
-
Page 23: Device Configuration
4 Device Configuration 4.1 Device Initialization It needs to set the user password when logging in for the first time (the username is admin by default). The figures listed in the following chapter are for reference only. There is difference about interface between different devices, please refer to the actual device for more details. -
Page 24: Modify Ip Address
Step 3 Click Save to complete initialization. 4.2 Modify IP Address In order to make the camera get access to network smoothly, please plan IP address reasonably according to the actual network environment. Step 1 Log in camera WEB interface in the IE browser. Note ... -
Page 25: Alarm Setup
Note IP address is the one which has been modified. Default user is admin; the password has been set during device initialization. Step 2 Click Login and the system will display the WEB main interface, which is shown in Figure 4-3. Note It will prompt you to install plug-in for the first system login, please save and install plug-in according to prompt. - Page 26 Step 4 Make corresponding settings upon alarm input and output in the alarm setup interface, and then click Save. The interface of alarm setup is shown in Figure 4-4. Alarm input is corresponding to the alarm input port of device I/O cable. It is to set corresponding NO and NC according to the high and low level signal generated by alarm input device when alarm occurs.
- Page 27 Figure 4-6 Alarm output: port ALARM_OUT and ALARM_COM form a switch, which can be used to provide alarm output. Normally the switch is on, the switch will be off when there is alarm output. Note ALARM_OUT1 and ALARM_OUT2 can only be used with ALARM_COM1 and ALARM_COM2 respectively when connecting to alarm device.
- Page 28 5 Appendix Ⅰ Lightening Protection and Surge Protection This series thermal hybrid dome adopts TVS lighting protection technology. It can effectively prevent damages from various pulse signals below 4000W, such as sudden lighting and surge. While maintaining your local electrical safety code, you still need to take necessary precaution measures when installing the thermal hybrid dome in the outdoor environment.
- Page 29 Note This manual is for reference only. Slight difference may be found in the user interface. All the designs and software here are subject to change without prior written notice. All trademarks and registered trademarks are the properties of their respective owners. ...
Need help?
Do you have a question about the TPC-SD8621-B25Z45 and is the answer not in the manual?
Questions and answers