Subscribe to Our Youtube Channel
Related Manuals for Hikmicro THUNDER Series
Summary of Contents for Hikmicro THUNDER Series
- Page 1 Thermal Image Scope THUNDER & THUNDER Pro Series User Manual V5.5.54 202212 Contact Us...
-
Page 2: Table Of Contents
Thermal Image Scope User Manual Table of Contents Chapter 1 Overview ........................1 1.1 Device Description ......................1 1.2 Main Function ........................1 1.3 Appearance ........................1 1.3.1 Component ......................1 1.3.2 Button ........................3 Chapter 2 Preparation ........................4 2.1 Cable Connection ...................... - Page 3 Thermal Image Scope User Manual 3.10 Adjust Digital Zoom ...................... 16 Chapter 4 Zeroing ......................... 17 4.1 Select Reticle Group ......................17 4.2 Correct Reticle ........................ 17 4.3 Set Reticle Color ......................19 Chapter 5 Measure Distance ......................20 Chapter 6 General Settings ......................21 6.1 Set OSD ...........................
- Page 4 Thermal Image Scope User Manual Safety Instruction ......................... 29 Legal Information ......................... 31 Regulatory Information ........................ 32...
-
Page 5: Chapter 1 Overview
Chapter 1 Overview 1.1 Device Description HIKMICRO THUNDER & THUNDER Pro thermal image scope provides clear image under harsh environment conditions like darkness, fog, smoke, dust, rain, snow, wood, camouflage, etc. The device is used as a handheld monocular, clip on scope, or thermal image scope. The scope is mainly applied to scenarios such as patrolling and hunting. - Page 6 Thermal Image Scope User Manual Figure 1-1 Components of Thermal Telescope Table 1-1 Component Description Component Function Lens Cover Protects the lens. Focus Ring Adjusts focus to obtain clear targets. To connect the device to power supply or transmit data Type-C Interface with a type-C cable.
-
Page 7: Button
Thermal Image Scope User Manual 1.3.2 Button Figure 1-2 Buttons on Device Table 1-2 Function of Buttons Icon Button Description ● Press: Standby mode/wake up device Power ● Hold: Power on/off ● Press: Capture Capture ● Hold: Start/stop record video Shutter ●... -
Page 8: Chapter 2 Preparation
Thermal Image Scope User Manual Chapter 2 Preparation 2.1 Cable Connection Connect the device and power adaptor with a type-C cable to power on the device. Alternatively, connect the device and PC to export files. Figure 2-1 Cable Interface 2.2 Install Battery 2.2.1 Battery Instruction ●... -
Page 9: Select Battery Type
Thermal Image Scope User Manual Figure 2-2 Loosen Knob 2. Make sure the battery's positive terminal and negative terminal are installed correctly. Figure 2-3 Install Batteries 3. Rotate the knob clockwise to tighten it. Take the battery away if the device is not used for a long time. 2.2.3 Select Battery Type You can change the battery type according to your need. -
Page 10: Change Eyepiece
Thermal Image Scope User Manual Steps 1. Install the device to the rail as the arrow shows. 2. Insert the screws, and tighten them. Figure 2-4 Tighten Screws 3. Tighten the knobs to secure the device. Figure 2-5 Secure the Device Note The rail is not included in the package. -
Page 11: Power On/Off
Thermal Image Scope User Manual Figure 2-6 Change Eyepiece 2.5 Power On/Off Power On When the battery is sufficiently charged, hold for about 2 seconds to power on the device. Power Off When the device is turned on, hold for about 2 seconds to power off the device. Note ●... -
Page 12: Menu Description
● Hotspot Password: the last 9 numbers of serial No. 4. Search the HIKMICRO Sight App on App Store (iOS System) or Google Play™ (Android System) to download it, or scan the QR code to download and install the app. -
Page 13: Check Firmware Status
3. (Optional) If the firmware is not the latest version, upgrade the device. See 2.7.3 Upgrade Device 2.7.3 Upgrade Device Upgrade Device via HIKMICRO Sight Before You Start Install HIKMICRO Sight on your phone and connect your device to the app. - Page 14 Thermal Image Scope User Manual Steps 1. Tap the device series to enter the device information interface. 2. Tap Device Upgrade to enter the firmware upgrade interface. 3. Tap Update to start upgrade. Figure 2-9 Upgrade Firmware Note The upgrading operation may vary due to app updates. Please take the actual app version for reference.
-
Page 15: Zeroing
Thermal Image Scope User Manual 2.8 Zeroing You can enable the reticle to view the position of the target. The functions such as freeze and Zeroing zoom help to adjust the reticle more accurately. See 2.8 for detailed instructions. Figure 2-10 Zeroing... -
Page 16: Chapter 3 Image Settings
Thermal Image Scope User Manual Chapter 3 Image Settings 3.1 Adjust Diopter Steps 1. Power on the device. 2. Hold the device and make sure the eyepiece covers your eye. 3. Adjust the diopter adjustment ring until the OSD text or image is clear. Figure 3-1 Adjust Diopter Note When adjusting diopter, DO NOT touch the surface of lens to avoid smearing the lens. -
Page 17: Adjust Contrast
Thermal Image Scope User Manual Figure 3-2 Adjust Brightness in White Hot Mode 3.4 Adjust Contrast In the menu mode, select and press to adjust image contrast. 3.5 Select Scene You can select proper scene according to actual using scene to improve the display effect. Steps 1. - Page 18 Thermal Image Scope User Manual Red Hot The hot part is red-colored in view. The higher the temperature is, the redder the color is. Fusion From high temperature to low temperature, the image is colored in from white, yellow, red, pink to purple.
-
Page 19: Correct Defective Pixel
Thermal Image Scope User Manual 3.7 Correct Defective Pixel The device can correct the defective pixels on the screen which are not performed as expected. Steps 1. Hold to show the menu. 2. Select 3. Press , and to move the cursor to the position of dead pixel. 4. -
Page 20: Adjust Digital Zoom
Thermal Image Scope User Manual 2. Select and enter PIP mode. The details show in the upper center. ● When reticle is enabled, the PIP view is the detail of reticle. ● When reticle is not enabled, the PIP view is the detail of central part. Figure 3-4 Set Picture in Picture Mode 3. -
Page 21: Chapter 4 Zeroing
Thermal Image Scope User Manual Chapter 4 Zeroing 4.1 Select Reticle Group If different users use the same device, the users can configure and save the reticle settings in their respective reticle group. Steps 1. In the view mode, hold to show the menu. - Page 22 Thermal Image Scope User Manual 3. Press to select a reticle No. You can select OFF to disable the reticle. 4. Press to select Distance. Press to switch the digit, and press change the number. Press to confirm. 5. Press to select Type, and press to switch the reticle type.
-
Page 23: Set Reticle Color
Thermal Image Scope User Manual 4.3 Set Reticle Color The function can change the color of the reticle in reticle correction display and distance measurement display. Before You Start Enable reticle correction first. Steps 1. In the view mode, hold to show the menu. -
Page 24: Chapter 5 Measure Distance
Thermal Image Scope User Manual Chapter 5 Measure Distance The device can detect the distance between the target and the observation position. Before You Start When measuring the distance, keep the hand and the position steady. Otherwise, the accuracy may be affected. Steps 1. -
Page 25: Chapter 6 General Settings
Thermal Image Scope User Manual Chapter 6 General Settings You can manually record video or capture picture when displaying live view. 6.1 Set OSD You can choose whether to display the OSD information on the live view interface. Steps 1. Hold to show the menu. -
Page 26: Burning Prevention
Thermal Image Scope User Manual Note After enabling this function, the brand logo only displays on the live view interface, captures and videos. 6.3 Burning Prevention This function can prevent the detector of the thermal channel from being burned. When you enable this function, the shield will close if the grey scale of the detector reaches a certain value. -
Page 27: Hot Tracking
Thermal Image Scope User Manual Figure 6-2 Start Recording The left top of image displays the information of recording time. 2. Hold again to stop recording. What to do next For exporting recording files, refer to Export Files. 6.5 Hot Tracking The device can detect the highest temperature spot in the scene and mark it on display. -
Page 28: Export Files
● When you connect the device to PC for the first time, it installs the drive program automatically. ● You can also export files via HIKMICRO Sight. See the user manual of the app for detailed operation. -
Page 29: Chapter 7 System Settings
Thermal Image Scope User Manual Chapter 7 System Settings 7.1 Synchronize Time Steps 1. Hold to show the menu. 2. Select , and press to enter the time setting interface. 3. Press to switch the time system, and press to select the time and date to be synchronized. -
Page 30: View Device Information
Thermal Image Scope User Manual Steps 1. Hold to show the menu. 2. Select , and press to switch on CVBS. Note The CVBS cable is not included in the package, please purchase it by yourself. 7.5 View Device Information Steps 1. -
Page 31: Chapter 8 Frequently Asked Questions
Thermal Image Scope User Manual Chapter 8 Frequently Asked Questions 8.1 Why is the monitor off? Check whether the device is off-battery. Check the monitor after charging the device for 5 minutes. 8.2 The image is not clear, how to adjust it? Adjust the diopter adjustment knob until the image is clear. -
Page 32: Chapter 9 Appendix
Chapter 9 Appendix 9.1 Device Command Scan the following QR code to get device common serial port commands. Note that the command list contains the commonly used serial port commands for HIKMICRO thermal cameras. 9.2 Device Communication Matrix Scan the following QR code to get device communication matrix. - Page 33 Thermal Image Scope User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. Laws and Regulations ● Use of the product must be in strict compliance with the local electrical safety regulations. Symbol Conventions The symbols that may be found in this document are defined as follows.
- Page 34 Thermal Image Scope User Manual detailed battery requirements. ● The device supports 3.0 V or 3.7 V rechargeable lithium battery or 3.0 V non-rechargeable dry battery. ● The battery size shall meet the requirements on CR17345 battery according to the IEC60086-2 standard.
- Page 35 INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKMICRO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
- Page 36 Thermal Image Scope User Manual Regulatory Information FCC Information Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 37 Thermal Image Scope User Manual Directive 2012/19/EU (WEEE Directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info.
- Page 38 Website: www.hikmicrotech.com E-mail: support@hikmicrotech.com UD31367B...
Need help?
Do you have a question about the THUNDER Series and is the answer not in the manual?
Questions and answers
My respect! i have a problem, on my thunder th35pc, there is no option in the menu to select the cross or anything about it so i can set it on the rifle without the sniper! thanks in advance! Greetings
To enable the crosshair (reticle) option on the Hikmicro THUNDER TH35PC, follow these steps:
1. Press the button to enter the menu.
2. Use the navigation buttons to select "Type" and press to switch the reticle type. There are 10 reticle types available.
3. (Optional) Select "Freeze" and press to enable or disable the function. This helps adjust the cursor position on a frozen image.
4. (Optional) Select "Zoom" and press to change the zoom ratio.
5. Use the navigation buttons to adjust the X and Y coordinates to position the reticle as needed.
6. Press the movement buttons to adjust the reticle until it reaches the desired position.
7. Hold the button to exit and confirm the changes.
This will enable and adjust the reticle on your device.
This answer is automatically generated