Ais Targets List; Ais Settings - Raymarine LIGHTHOUSE SPORT 3.18 Operation Instructions Manual

AIS vectors can be enabled and disabled using the [AIS vectors] toggle
switch.
Target vectors can be enabled and disabled for individual targets: Press and
hold on an AIS target to display the context menu, and then select [Vector].
The vectors can be set to [True] or [Relative].

AIS targets list

Tracked AIS targets are listed in the AIS targets list.
The AIS targets list can be accessed from the Chart app menu: [Menu >
AIS Targets ].
When an AIS target is highlighted the LiveView pane will pan and zoom to
show the AIS target.
Chart app
True vectors
In true mode the vectors are shown ground
referenced (i.e.: their actual path over
ground).
Relative vectors
In relative mode the vectors are shown
relative to your vessel's position.
When an AIS target is selected the AIS target details page is displayed.

AIS Settings

Settings related to AIS can be accessed from the Target Settings menu:
[Menu > AIS Targets > Target Settings].
[AIS:]
[Silent mode (don't transmit
my position:]
[Hide static targets:]
[AIS vectors:]
[Vectors period:]
[Reference mode:]
Enables and disables display of AIS targets
in the Chart app.
Note:
When disabled AIS targets and details are
still available in the AIS targets list.
Your AIS hardware will not transmit any data
when in silent mode. In Silent mode AIS
data can still be received from other vessels.
Targets travelling under 2 knots will be
hidden, unless the target is dangerous or
becomes dangerous.
Enables and disables display of vectors on
AIS targets.
Determines the predicted position of the
target (and therefore the length of the
vector).
Note:
The Vectors period settings also applies
to your vessel's COG vector.
Determines whether vectors are shown in
true or relative mode.
75