Specification; Electrical Connection - Bourgeat 777430 Manual

Self-levelling trolleys for plates and dishwasher baskets
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 5
RANGE
Reference
Description
777430
Built-in warming stack for plates 200-310mm in diameter
777431
Built-in warming stack for plates 200-260mm in diameter
777432
Built-in neutral stack for plates 200-260mm in diameter
777104
One-stack warming trolley for plates 200-310mm in diameter
777326
Two-stack warming trolley for plates 200-260mm in diameter
777304
Two-stack warming trolley for plates 200-310mm in diameter
777306
Two-stack ventilated warming trolley for plates 200-310mm in diameter
Versatile trolley for large plates:
- round: 185-285mm in diameter
777406
- square: 185 x 185 to 285 x 285mm
- rectangular: 185 x 285mm
Versatile trolley for medium plates:
- round: 185-260mm in diameter
777426
- square: 185 x 185 to 260 x 260mm
- rectangular: 185 x 260mm
777500
Two-stack neutral perforated trolley for plates 200-310mm in diameter
777604
Universal warming trolley
777606
Universal ventilated warming trolley
777506
Universal neutral perforated trolley
777806
Trolley for baskets of 500 x 500mm
777816
Perforated trolley for baskets of 500 x 500mm
777830
Built-in stack for baskets of 500 x 500mm
Adaptation to weight of plates or dishtrays by adding or removing springs.

SPECIFICATION

Models
Trolley 1 stack
LxPxH mm
650x510x900
Net weight
35 kg
Maximum load
80 kg
Power
1400 W
Amperage
Protection index
Models
LxPxH mm
Net weight
Maximum load
Power
Amperage
Protection index
CE approved. Heating trolleys comply with the NF EN 60335-1 standard.

ELECTRICAL CONNECTION

y Tension 230V sigle phase 50Hz (with ventilation) and 50/60Hz (no ventilation).
y Cable supplied with appliance, 1mm² section, 2 phase + earth.
y The appliances must be connected to a single phase, earthed supply and be hooked up to a high sensitivity differential line conditioner, protected from
surges.
Trolley :
y Connection to a 16 Amp. Single phase socket
y Before unplugging or plugging in the appliance, make sure that the master switch located on the control panel is off.
y The appliance cannot be connected without the single phase plug. Any modification will cancel the guarantee.
Fitted plate stack :
Model for plates :
y Cut-out dimensions: 390 x 390mm for 200 to 310mm diameter plate model / 330 x 330mm for 200 to 260mm diameter plate models.
y This appliance has no switch. The installer should connect it to a switch or an all pole circuit breaker.
y Heating devices are to be connected to an equipotential connection to be attached to screen M5 located at the bottom (initials
Neutral model for dishwasher baskets :
y Size of cut-out : 637 x 637 mm
Trolley 2 stacks Ø
200 to 310mm and
universal
990x510x900
55 kg
160 kg
1400 W
6 A
6 A
21
21
Warm stack
for plates
Ø 200 to 310mm
428x428x782
13 kg
80 kg
900 W
4 A
21
ENGLISH
Trolley 2 stacks,
Perforated trolley 2
Ø 200 to 260mm
stacks and universal
898x442x900
990x510x900
37 kg
33 kg
140 kg
160 kg
950 W
/
4 A
/
25
/
Warm stack
Stack for dishwasher
for plates
baskets
Ø 200 to 260mm
500 x 500
355x355x741
659x659x835
9 kg
15 kg
70 kg
120 kg
900 W
/
4 A
/
21
/
Capacities
65
60
60
65
130
130
130
130
130
130
120 to 180
according to
diameter / 216
bowls of 130mm
7
7
7
Trolleys for
dishwasher baskets
500 x 500
756x702x956
32 kg
120 kg
/
/
/
).
- 5 -

Advertisement

Table of Contents
loading

Table of Contents