Advantech WISE-2410X-A02 User Manual page 40

◼
Temperature alarm
–
Please select Channel 3 for Temperature sensor configuration.
–
Sensor Offset Value: Offset setting between measurement temperature value
and real temperature value.
–
Enable: WISE-2410X will upload an alarm message according to the user-
defined threshold value. If WISE-2410X detected a higher temperature
value than the threshold setting, WISE-2410X will send a temperature
alarm mes- sage to a gateway. This function is not limited by the data uplink
period. In another word, If customer enables this function, WISE-2410X will
keep moni- toring the surface temperature every second.
–
Send Alarm Event:
Continuously means WISE-2410X will keep sending an alarm message to a
gateway until the WISE-2410X detected temperature is lower than the
thresh- old value set by a user.
Four-time means WISE-2410X will send an alarm message to a gateway. If
the WISE-2410X does not receive acknowledgment from the gateway, WISE-
2410X will retry the alarm message with maximum 3 times.
WISE-2410X User Manual 32