Table Of Contents - Mitsubishi Diamond Plus 120U User Manual

CAUTION
The power cord provided with this monitor is de-
signed for safety and must be used with a properly
grounded outlet to avoid possible electrical shock.
Do not remove the monitor cabinet as this can
expose you to very high voltages and other hazards.
MANUFACTURER DECLARATION FOR
CE-MARKING:
We, Mitsubishi Electric Corp., declare under our sole
responsibility, that this product is in conformity with
the following standards:
EN60950
EN55022 Class B
EN50082-1
EN61000-3-2
EN61000-3-3
following the provisions of:
73/23/EEC Low Voltage Directive
89/336/EEC EMC Directive
WARNING!
This product is not designed for use in life support
devices and Mitsubishi Electric Corporation makes no
representations to the contrary. Life support devices
are those devices which are used to measure, diag-
nose, or evaluate the tissue, systems or functions of
the human body; or other devices employed to support
or sustain life or good health.
Trademark
IBM, PC, PS/2, PS/V, Personal System/2 are registered trade-
marks of International Business Machines Corp.
Apple Macintosh is a registered trademark of Apple Computer, Inc.
Quadra is a trademark of Apple Computer, Inc.
UNIX is a registered trademark in the United States and other
countries, licensed exclusively through X/Open Company Limited.
E S
is a U.S. registered mark.
NERGY TAR
© 1999 MITSUBISHI ELECTRIC CORPORATION
CONTENTS
1. INTRODUCTION ..................................................... 6
1.1 Features ........................................................ 6
1.2 Internal Preset Memory Capability ................ 7
1.3 Power Management Function ....................... 7
1.4 DDC .............................................................. 7
1.5 Location Considerations ............................... 7
1.6 Cleaning Your Monitor .................................. 7
1.7 Unpacking ..................................................... 8
1.8 Tilt/Swivel Base ............................................. 8
Screen Position Adjustment .......................... 8
1.9 Quick Operation Chart .................................. 8
2. PART NAME ............................................................ 9
2.1 Control Names .............................................. 9
2.2 Function ........................................................ 9
3. INSTALLATION AND CONNECTION ..................... 10
3.1 AC Power Connection ................................... 10
3.2 Signal Cable Connection .............................. 10
3.2.1 Connecting to Any IBM VGA Compatible
System ................................................... 10
3.2.2 Connecting to An Apple Macintosh
Computer ............................................... 10
3.2.3 Connecting to a Unix Workstation &
Third Party Graphics Card ..................... 10
3.2.4 BNC Connection .................................... 11
3.3 USB System Basic Application ..................... 11
3.4 Installation of USB Function .......................... 12
4. OSD(On Screen Display) FUNCTIONS .................. 14
4.1 How to adjust the screen .............................. 14
4.2 Adjustment Items .......................................... 15
5. TROUBLESHOOTING ............................................ 19
6. SPECIFICATIONS ................................................... 21
7. APPENDIX .............................................................. 22
7.1 Monitor Signal Input Connector (DB9-15P) .. 22
7.2 Signal Cable SC-B102 or SC-B104 .............. 22
7.3 Macintosh Adapter AD-A205 Settings .......... 22
- 5 -