Table of Contents
Advertisement
"Request for unknown module key 'Mellanox Technologies signing key:
61feb074fc7292f958419386ffdd9d5ca999e403' err -11"
However, please note that a similar message as the following will still be presented:
"my_module: module verification failed: signature and/or required key missing - tainting kernel"
This message is only presented once, upon first module boot that either has no signature or
whose key is not in the kernel key ring. Therefore, this message may go unnoticed. Once the
system is rebooted after unloading and reloading a kernel module, the message will appear.
(Note that this message cannot be eliminated.)
2.
Update the initramfs on RHEL systems with the stripped modules.
mkinitrd /boot/initramfs-$(uname -r).img $(uname -r) --force
Performance Tuning
Depending on the application of the user's system, it may be necessary to modify the default
configuration of network adapters based on the ConnectX® adapters. In case that tuning is required,
please refer to
the Performance Tuning Guide for NVIDIA Network Adapters at https://
community.nvidia.com/docs/DOC-2489.
VMware Driver Installation
This section describes VMware Driver Installation.
Hardware and Software Requirements
Requirement
Platforms
Device ID
Operating System
Installer Privileges
Installing NVIDIA NATIVE ESXi Driver for VMware vSphere
Please uninstall all previous NVIDIA driver packages prior to installing the new version. See
Removing Earlier NVIDIA Drivers
A server platform with an adapter card based on one of the
following NVIDIA's devices:
•
ConnectX®-6 Dx (EN) (firmware: fw-ConnectX6 Dx)
For the latest list of device IDs, please visit NVIDIA's website.
ESXi 6.5
The installation requires administrator privileges on the target
machine.
for further information.
Description
55
Advertisement
Table of Contents
Troubleshooting
