Connectx-6 Dx Ic; Encryption; Nvidia Multi-Hosttm Support - Nvidia ConnectX-6 Dx MCX623432AE-ADAB User Manual

Ethernet adapter cards for ocp spec 3.0
Table of Contents

Advertisement

Cal
Item
lou
t
FRU EEPROM
SMBus Interface
Voltage Regulators
CPLD Interface
ConnectX-6 Dx IC 
The ConnectX®-6 Dx EN family of adapter IC devices delivers two ports of 10/25/40/50/100Gb/s or
a single port of 200Gb/s Ethernet connectivity paired with best-in-class hardware capabilities that
accelerate and secure cloud and data-center workloads.

Encryption

Applies to Crypto-enabled OPNs.
ConnectX-6 Dx brings security to every end-point, including:
Purpose-built inline acceleration engines that offload IPsec and TLS data-in-motion and XTS-
AES data-at-rest cryptographic operations.
Stateful firewall solution acceleration, powered by Open vSwitch connection tracking and
NVIDIA's ASAP2 technology.
Embedded hardware root-of-trust and support for RSA-based secure firmware update and
secure boot, guaranteeing the network adapter's integrity.
NVIDIA Multi-Host
In addition to building exceptionally high bandwidth to the data center, the ConnectX-6 Dx device
enables leveraging this speed across the entire data center utilizing its NVIDIA Multi-Host feature.
Using its 32-lane PCI Express interface, a single ConnectX-6 Dx device can provide 200GbE
interconnect for up to four independent hosts without any performance degradation.
The figure below shows a ConnectX-6 Dx device with NVIDIA Multi-Host connected to four separate
hosts, each with a PCIe x4 interface, on one side to a switch on the other side.
FRU EEPROM capacity 4Kb
Allows BMC connectivity using MCTP over SMBus or MCTP over PCIe protocols.
Voltage supply pins that feed onboard regulators.
Controls the networking port LEDs.
TM
  Support
Description
16

Advertisement

Table of Contents
loading

Table of Contents