Table of Contents
Advertisement
Retention Mechanism
Internal-Lock Bracket
Ejector-Latch Bracket
Please note that the following figures are for illustration purposes only.
Cards with Thumbscrew (Pull-tab) Bracket
1.
Before installing the card, ensure the system is off, and the power cord is not connected to
the server. Please follow proper electrical grounding procedures.
2.
Open the system case.
3.
Align the card with the system rails.
4.
Push the card until connectors are in full mate.
5.
Turn the captive screw clockwise until firmly locked.
Installation Instructions
Installation Instructions for Cards with Internal Lock
Installation Instructions for Cards with Internal-Lock Bracket
25
Advertisement
Table of Contents
Troubleshooting
