Table of Contents
Advertisement
2.2.3
How to Eject a Data Cassette (Automatic)
For details about automatic data cassette ejection, refer to "1.4Setting Backup Job (Setting Automatic
Ejection)"( pg.68).
2.2.4
How to Forcibly Eject the Data Cassette If It Cannot
be Ejected
The data cassette will be forcibly ejected if the eject button is pressed for more than 5 seconds. Only
use "Forcible ejection" when the data cassette cannot be ejected due to an error. Do not use it in
normal circumstances.
"Forcible ejection" is a function that prevents the leakage of customers' data. Performing "Forcible
ejection" may cause damage to the data cassette or this product rendering them unable to be used.
Make sure that the data cassette cannot be ejected using normal operations or software before
performing "Forcible ejection".
Performing "Forcible ejection" may cause damage to the data cassette. Data cannot
be guaranteed. After forcibly ejecting a data cassette, do not use the same one
again.
When a data cassette cannot be ejected using normal procedures ( " Manually ejecting a data
cassette"(pg.75)), use the following procedures.
How to Forcibly Eject Media
Press the eject button for more than 5 seconds. The Tape LED blinks and the cartridge is forcibly
ejected. Wait until the data cassette to be ejected. If the data cassette is not ejected, after shutting
down the server turn the power on again and try to forcibly eject the data cassette again.
If the data cassette cannot be ejected using these procedures, it is possible that this product may be
broken. Contact an office listed in "Appendix B Contact Information" ( pg.87).
76
Advertisement
Table of Contents
