Fujitsu PRIMERGY Tape Drv DAT72 User Manual page 66

• When a downloaded device driver has been restored to a floppy disk
10
Double click [Hewlett Packard DAT72 drive].
"Completing the Hardware Update Wizard" appears.
11
Click [Complete], and click [Close].
12
Restart the server.
Windows 2000 Server
1
Log on to the Windows 2000 Server with administrator privileges.
2
Click [Start] → [Control Panel] → [System].
3
Select the [Hardware] tab and click [Device Manager].
4
Double click [Other devices], and then double click [HP C7438A
USB Device].
5
Select the [Driver] tab and click [Update Driver].
"Start Device Driver Upgrade Wizard" appears.
6
Click [Next].
7
Select "Find the best driver for the device", and click [Next].
8
Select "Specify the location", click [Next], set in the copy source as
follows, and click [OK].
• When using a ServerStart CD-ROM
• When a downloaded device driver has been restored to a floppy disk
The "The following device driver is found" message appears.
9
Click [Next].
"Completing Device Driver Upgrade Wizard" appears.
10
Click [Complete], and click [Close].
11
Restart the server.
66
• Windows Server 2003 x64
[CD-ROM drive]:\DRIVERS\Tape\DAT72\drivers\WinNT\Win2003\x64
• Windows Server 2003
A:\drivers\WinNT\Win2003\i386
• Windows Server 2003 x64
A:\drivers\WinNT\Win2003\x64
[CD-ROM drive]:\DRIVERS\Tape\DAT72\drivers\WinNT\Win2000
A:\drivers\WinNT\Win2000