Sprout SOSTA BED HEADBOARD Assembly Manual

Advertisement

SOSTA BED
HEADBOARD / FOOTBOARD
ASSEMBLY GUIDE

PARTS

(2x)
A
B
Bracket
Headboard/Footboard
(2x)
(4x)
C
D
1.2" Hex Screw
1.6" Hex Screw
INCLUDED TOOLS
OPTIONAL
4mm Hex
Hex
Power
Wrench
Bit
Drill

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SOSTA BED HEADBOARD and is the answer not in the manual?

Questions and answers

Summary of Contents for Sprout SOSTA BED HEADBOARD

  • Page 1 SOSTA BED HEADBOARD / FOOTBOARD ASSEMBLY GUIDE PARTS (2x) Bracket Headboard/Footboard (2x) (4x) 1.2” Hex Screw 1.6” Hex Screw INCLUDED TOOLS OPTIONAL 4mm Hex Power Wrench Drill...
  • Page 2 ASSEMBLY VIDEO Enjoy the best assembly experience sprout-kids.com/headboard With groove opening face up, set Headboard/Footboard on ground as shown. Place Bracket rmly into groove. Repeat for both sides of the Headboard/Footboard OPTIONAL: A rubber mallet can help push pieces together.
  • Page 3 Insert (2x) 1.2” Hex Screws as shown to secure Bracket . Repeat for both Brackets 1.2” Hex Screw Actual Size. Place screw on paper to verify correct size. Flip Headboard/Footboard upright and insert Bracket ends rmly into bed frame slots (using a rubber mallet if necessary). Ensure is ush against bedframe before proceeding.
  • Page 4 Repeat for each side. 1.6” Hex Screw Actual Size. Place screw on paper to verify correct size. For Safety Regulations and Standards: sprout-kids.com/sosta/safety If you have questions, reach out to support@sprout-kids.com WWW.SPROUT-KIDS.COM QUARK ENTERPRISES 2022 PO BOX 1123, PROVO, UT 84601 DOCUMENT: AI-SBT-Headboard...

This manual is also suitable for:

Sosta bed footboard

Table of Contents