Related Manuals for Sprout SOSTA BED 3 Rail
Summary of Contents for Sprout SOSTA BED 3 Rail
- Page 1 SOSTA BED 3/4 Rail ASSEMBLY GUIDE PARTS 3/4 Side Rail (2x) (2x) 1.6” Hex Screw 2” Hex Screw INCLUDED TOOLS OPTIONAL 4mm Hex Power Wrench Drill...
- Page 2 ASSEMBLY VIDEO Enjoy the best assembly experience sprout-kids.com/3-4rail If using a drill, set clutch on drill to LOW SETTING (around 3). If your drill has two speeds, set it to the SLOW SPEED (1). A high clutch setting will strip screw heads and render parts useless! CLUTCH TOO HIGH: If the drill twists dramatically in your hand when drilling.
- Page 3 Partially screw (2x) 1.6” Hex Screws through the side holes of the 3/4 Side Rail and into the side holes of the Headboard/Footboard. 1.6” Screw Actual Size Place screw on paper to verify correct size. Partially screw (2x) 2” Hex Screws through the bottom holes of the 3/4 Side Rail and into the holes of the Platform.
- Page 4 Fully screw in each of the Hex Screws. For Safety Regulations and Standards: sprout-kids.com/sosta/safety If you have questions, reach out to support@sprout-kids.com WWW.SPROUT-KIDS.COM QUARK ENTERPRISES 2022 PO BOX 1123, PROVO, UT 84601 DOCUMENT: AI-SBT-3-4-Rail...
Need help?
Do you have a question about the SOSTA BED 3 Rail and is the answer not in the manual?
Questions and answers