Ricoh A028 Service Training Manual page 149

1 July 1994
Reverse section
SADF exit gate
The SADF exit gate is switched by the SADF exit gate
solenoid. When the solenoid is OFF, the gate plate is
lowered by the force of the spring to guide the original to
the reverse section.
Reverse junction gate
The reverse junction gate pawls are switched by the
reverse junction gate solenoid. When the solenoid is off,
the solenoid plunger and gate pawls are pulled down by
the spring to guide the original in the reverse section.
When the solenoid is ON, the original is guided to the
intermediate transport unit side.
Intermediate transport unit
The intermediate transport unit is lowered by sliding the
release lever. This helps the removal of jammed
originals.
SADF exit gate
SADF exit gate solenoid
Transport belt
2-113
Reverse
junction
pawls Reverse junction
gate solenoid
Lock pin
Intermediate
transport unit
Belt
tension
arm
ADF
Release lever
Lock pawl