Stiga CR 430 Li 80 Series Operator's Manual page 151

The user must follow all the instructions provided
in the accompanying documentation.
The warranty does not cover damages resulting from:
• Failure to become familiar with the documentation
accompanying the machine (Instruction manuals).
• Professional use.
• Carelessness, negligence.
• External causes (lightning, impact, presence of
foreign bodies inside the machine) or incidents.
• Incorrect use or assembly or prohibited
by the manufacturer.
• Poor maintenance.
• Modification to the machine.
• Use of non-genuine spare parts (adaptable parts).
• Use of accessories not supplied or
approved by the manufacturer.
The warranty does not cover:
13. MAINTENANCE TABLE
Intervention
MACHINE
Check all fasteners
Safety checks/check controls
Check the rear discharge
/ side discharge guards.
Check the grass catcher,
side discharge chute.
Check the cutting means
Check the battery
charge status
Recharge the battery
General cleaning
and inspection
Checking for any damage to
the machine. If necessary,
contact the authorised
service centre.
Cleaning the air filter
Drive adjustment
Replacing the cutting-means
* Refer to the battery/battery charger manual.
** The operation must be carried out by your Dealer or a specialised Service Centre
*** Operation to be performed at the first signs of any malfunction
14. PROBLEM IDENTIFICATION
If problems persist after having performed the above operations, contact your dealer.
PROBLEM
• The routine/extraordinary maintenance operations
• Normal wear and tear of consumables, such
• Normal wear and tear.
• Deterioration in the appearance of
• Cutting means supports.
• Any ancillary expenses related to the enforcement
The user is protected by his or her own national legislation.
The user's rights under the national laws or his or her own
country are not in any way restricted by this warranty.
Frequency
Before each use
Before each use
Before each use
Before each use
Before each use
Before each use
After each use
After each use
After each use
Once a month
***
-
PROBABLE CAUSE
EN - 13
(described in the instruction manual).
as drive belts, cutting means, headlights,
wheels, safety bolts and cabling.
the machine due to use.
of the warranty, such as costs incurred to travel to
the user's location, transfer of the machine to the
Dealer, rental of replacement equipment or calling of
independent enterprises to perform maintenance work.
Notes
par. 7.4
par. 6.2
par. 6.2.1
par. 6.2.1
par. 6.2.1
*
par. 7.2.3 *
par. 7.3
-
par. 7.5
par. 7.6
par. 8.1 ***
SOLUTION