Mitsubishi MELSEC-A AJ65VBTCU-68DAVN User Manual page 72

5 PROGRAMMING
Checking of AJ65VBTCU-68DAVN status
Initial settings
Changing of initial settings
Initial setting change
Processing at initial settings
The program enclosed by the dotted line is necessary only when the initial settings are changed.
5 - 10
MELSEC-A
Sets SB starting number.
Sets "B".
Sets B0.
Sets 512 points.
Sets SW starting number.
Sets "W".
Sets W0.
Sets 256 points.
Dedicated instruction
(RRPA)
Starting I/O number of
master module
Parameter storage
starting device
Reads data link status.
AJ65VBTCU-68DAVN
data link normal
AJ65VBTCU-68DAVN
data link abnormal
Analog output enable/
disable setting (RWw8)
CH.1 to CH.4 output range
setting (RWw9)
HOLD/CLEAR setting
(RWwB)
Turns on initial data
processing completion flag
(RY18).
Turns on initial data
setting request flag (RY19).
Analog output enable/
disable setting (RWw8)
CH.1 to CH.4 output range
setting (RWw9)
Turns on initial data setting
request flag (RY19).
Turns off initial data
processing completion flag
(RY18).
Turns off initial data setting
request flag (RY19).
5 - 10