Performance Specification - Mitsubishi MELSEC-A AJ65VBTCU-68DAVN User Manual

3 SPECIFICATION

3.2 Performance Specification

Item
Protection class
Digital input
Analog output
3
I/O characteristics, maximum
resolution, accuracy
(accuracy relative to
maximum value of analog
output value)
Maximum conversion speed
Output short-circuit protection
Absolute maximum output
Number of analog output
points
CC-Link station type
Number of occupied stations
Communication cable
Isolation specifications
Noise durability
External wiring system
One-touch
connector for
communication
One-touch
Applicable
connector for
wire size
power supply/FG
One-touch
connector for
analog I/O
Applicable DIN rail
External supply power
Weight
3 - 2
Table 3.2 indicates the performance specifications of the AJ65VBTCU-68DAVN.
Table 3.2 Performance Specifications
-10 to +10VDC (external load resistance: 2k to 1M )
Digital Input
Analog Output Range Ambient temperature
Value
-10 to +10V
-4000 to
User range setting 1
+4000
(-10 to +10V)
Voltage
0 to 4000
User range setting 2
(Ver.1 remote device station, Ver.2 remote device station)
When Ver.1 remote device station (Ver.1-compatible slave station) is set:
When Ver.2 remote device station (Ver.2-compatible slave station) is set:
1 station (Expanded cyclic setting: Quadruple)
Ver. 1.10 compatible CC-Link dedicated cable FANC-110SBH,
Specific isolated area
Across communication system terminals
and all analog output terminals
Across power supply system terminals and
all analog output terminals
Between channels
By noise simulator of 500Vp-p noise voltage, 1µs noise width and 25 to 60Hz noise frequency
One-touch connector for communication [Transmission circuit]
(5 pins pressure welding type, the plug for the connector is sold separately)
One-touch connector for power supply and FG [Unit power supply and FG]
(5 pins pressure welding type, the plug for the connector is sold separately)
One-touch connector for analog I/O
(4 pins pressure welding type, the plug for the connector is sold separately)
<Sold separately>
Online connector for communication : A6CON-LJ5P
Online connector for power supply : A6CON-PWJ5P
Communication line : Ver. 1.10 compatible CC-Link dedicated cable
2
0.5mm (AWG#20) [ 2.2 to 3.0], shielded wire 0.5mm
1.0 to 1.4 (A6CON-P214), 1.4 to 2.0 (A6CON-P220) [Applicable cable : 0.14 to 0.2 mm
1.0 to 1.4 (A6CON-P514), 1.4 to 2.0 (A6CON-P520) [Applicable cable : 0.3 to 0.5 mm
TH35-7.5Fe, TH35-7.5Al (conforming to JIS C 2812)
CC-Link connector type metal installation fitting : A6PLT-J65V1
24V DC (20.4V DC to 26.4V DC, ripple factor within 5%)
AJ65VBTCU-68DAVN
IP1XB
16-bit signed binary (-4096 to +4095)
0 to 55°C
±0.3%
(±30mV)
0 to 5V
±0.3%
1 to 5V
(±15mV)
(0 to 5V)
1ms/channel
Provided
±12V
8 channels/module
Remote device station
3 stations
FA-CBL200PSBH, CS-110
Isolation Dielectric
method withstand voltage
Photocoupler
isolation 500V AC for
1 minute
Transformer
isolation
Not isolated
2
0.66 to 0.98 mm (AWG#18) [ 2.2 to 3.0]
Wire diameter 0.16 mm or more
Inrush current : 4.3A, within 1.2ms
Current consumption 0.15A
0.16kg
MELSEC-A
Accuracy
Max.
Ambient temperature
Resolution
25±5°C
±0.2%
2.5mV
(±20mV)
1.25mV
±0.2%
(±10mV)
1.0mV
Insulation resistance
5M or higher,
measured with 500V DC
insulation resistance
tester
- -
2
(AWG#20)
2
]
2
]
3 - 2