The Recovery - Barco iCon H250 Installation Manual

2. After about 5 seconds, the Load keymap (Enter for default) : prompt will appear: you have a limited amount of time to change
the keyboard configuration. For AZERTY you can enter the following figure: 2 (= the figure corresponding to Belgian keyboard
configuration).
Image 2-6
3. A few seconds later, the USB DVD reader will eject the disc. You see this prompt: root@sysresccd/root%
Image 2-7
4. Remove the CD-ROM Hard Disk Recovery Data from the USB DVD reader
2.3

The recovery

How to do the hard disk recovery?
1. Insert the DVD-ROM Hard Disk Recovery Data in the USB DVD reader
2. At the prompt, enter the following text: mount —t iso9660 /dev/sr0 /mnt/cdrom
Tip: Pay attention to the spaces!
R59770070 ICON H250 / ICON H400 31/01/2007
2. Hard disk recovery procedure
7