Icon H250 / H400 Server Setup - Barco iCon H250 Installation Manual

2. Hard disk recovery procedure
Image 2-15
2.4

iCon H250 / H400 server setup

Set the boot configuration to its original state
1. When the server restarts (on the first beep sound), press F2 to enter the BIOS
2. Navigate to the tab Boot
3. Use the + and the - key to move the IDE 0 to the top of the Boot priority list
4. Navigate to the tab Exit
5. Select Exit Saving Changes: the server will start to reboot
Setup the server again
1. After some minutes, you will be asked to enter the Windows
bottom plate of the projector
Image 2-16
2. Now the Windows
Tip: Check the configuration of your keyboard first (AZERTY or QUERTY)
3. Start the Auto-configuration by selecting Now
10
operation system reboots: you will be asked to enter the password. Enter the text: Barco
®
® XP Product Key: enter this key. You can find it on a label on the
R59770070 ICON H250 / ICON H400 31/01/2007