Poly Rove B2 Base Manual

Hide thumbs Also See for Rove B2 Base:

Pairing A Poly Rove Handset To A B2 Base

Pairing a Poly Rove handset to an active B2 Base unit.

• Poly Rove B2 Base

• Poly Rove 30 Handset

• Poly Rove 40 Handset

1. Press and hold the button at the top of the B2 Base until it starts blinking green

https://support.8x8.com/equipment-devices/phones/poly/Pairing_A_Poly_Rove_Handset_To_A_B2_Base

Updated: Fri, 14 Oct 2022 20:53:18 GMT

Table of Contents

Do you have a question about the Rove B2 Base and is the answer not in the manual?

Lee Vincent Mottee

June 5, 2025

Base set flashing red

Page 1 Pairing A Poly Rove Handset To A B2 Base Objective Pairing a Poly Rove handset to an active B2 Base unit. Applies To • Poly Rove B2 Base • Poly Rove 30 Handset • Poly Rove 40 Handset Procedure 1. Press and hold the button at the top of the B2 Base until it starts blinking green https://support.8x8.com/equipment-devices/phones/poly/Pairing_A_Poly_Rove_Handset_To_A_B2_Base...
Page 2 5. Repeat steps 2-3 until all handsets are registered 6. Press and hold the button at the top of the B2 Base until it STOPS blinking and is solid green https://support.8x8.com/equipment-devices/phones/poly/Pairing_A_Poly_Rove_Handset_To_A_B2_Base Updated: Fri, 14 Oct 2022 20:53:18 GMT Powered by...
Page 3 • SRTP cannot be enabled on this device in Admin Console. If this feature is required, please reach out to our support team who can enable it. • Poly does not yet support SIP Publishes on Rove devices, so no quality metrics will be available in ‘Analytics for 8x8 Work.

Rove 30 handset Rove 40 handset