Microtek ScanMaker 1000XL User Manual page 29

4. In the Settings window,
choose the film type you are
using from the Film Type
menu.
When the Film Type menu appears the first time, the film type is blank because the
default film type has not yet been selected. You need to specify the film type
attributes setting in the Select Film Type window below. For details on how to
select the film type, refer to a PDF document called "ScanWizard Pro Reference
Manual" in your Microtek software CD-ROM, and see the Addendum to
ScanWizard Pro section.
Note: The Film Type option is enabled only when negative film is your film type
selection. Otherwise, this option will not appear, and the option switches to the
Input Profile/Scanner Profile option for positive film scanning.
5. Click the Overview button to perform a preliminary scan of your original.
6. Select the Scan Frame tool from the Toolbar in the Preview window, and choose
the area to be scanned by dragging a rectangle around it. You will see a flashing
frame (marquee) around the selected area.
7. Specify your scanning requirements in the Settings window.
a) Select a desired image type.
b) Select a desired resolution.
c) Adjust the scan frame settings if necessary.
8. Adjust image quality if necessary, using the Advanced Image Correction (AIC) tools.
ScanMaker 1000XL Supplement 29