Setup - Sagitter ARCHER B2 User Manual

5.1 – MENU
ADDRESS
MODE
LAMP
RESET
OPTION

SETUP

INFORMATION
WIRELESS (active only
with optional wireless
board)
5.1.1 "WIRELESS" FUNCTIONS (optional):
ENABLE WIRELESS:
- ON = This option enables Wireless.
- OFF = This option disables Wireless.
Address = 001
13 Ch
14 Ch
16 Ch
Auto (Alone)
Auto (Master)
Sound (Alone)
Sound (Master)
Lamp OFF
Lamp ON
Reset time
Reset NO
Reset YES
Pan/Tilt swap (ON/OFF)
Pan reverse (ON/OFF)
Tilt reverse (ON/OFF)
Lamp on by power (ON/OFF)
Shortcut (ON/OFF)
DMX lost set (ON/OFF)
Display reverse (ON/OFF)
Display delay off (ON/OFF)
Reset default (ON/OFF)
Password
Calibration
Mic sensitivity
Temperature
Lamp time
ID
Version
Enable Wireless (ON/OFF)
Enter 3S Unlink
Status (DMX ON, Linking, NO
DMX, Unlink)
5. - SETUP
Set DMX address
13 channels mode
14 channels mode
16 channels mode
Auto mode Alone
Auto mode Master
Sound mode Alone
Sound mode Master
Lamp OFF
Lamp ON
Lamp hours reset
Swap Pan/Tilt
Pan reverse
Tilt reverse
ON= lamp ON – power ON
OFF= lamp OFF – power ON
ON=from last gobo to the first: direct
OFF= from last gobo to the first: reverse
ON=if no DMX, the projector stay in the last position
OFF= if no DMX, the projector goes to zero
Display reverse
ON=display switches of after some minutes
OFF=display always on
Default reset
Lamp OFF – DMX address = 001
Password for calibration = 008
Pan / Tilt / Color / Gobo / Prism 1 / Prism 2 / Frost /
Focus / Dimmer
Microphone sensitivity
Internal temperature
Lamp hours
ID address
Software version
Enable / disable Wireless
Unlink wireless
Wireless status display
20