Table of Contents
Advertisement
Available languages
Available languages
5.1 – MENU
MENU
001 - 512
ADDRESS
1px 1Ch / 1px 4Ch / 1px 6Ch / 2px 2Ch / 2px
MENU
CH. Mode
6Ch / 2px 10Ch
MENU
A (STD) / B (180)
PIXORDER
MENU
SQUARE / INV. SQ / S-CURV / LINEAR
CURVE
MENU
OFF / ON
LOCKING
MENU
BLACKOUT / FREEZE
NO DMX
MENU
AUTO / SILENT
FAN
MENU
xxx F / xxx °C
TEMP
MENU
NO / YES
FACTORY
MENU
xxxxxxx
FIRMWARE
IMPORTANT NOTE: To rotate the display, press MODE and when the display shows the
main menu, press UP.
5.2 – MASTER/SLAVE MODE
In this mode, more units can be linked together as a single chain and work in a synchronized
way.
• Link together all the units from the connector DMX OUT to DMX IN.
• Define the first unit of the chain as MASTER, all other units must be set in SLAVE mode.
• Operate the Master unit in Automatic mode or Static mode to operate the entire system.
The entire chain of Slave unit will act as the Master unit
5.3 - DMX MODE
1 channel mode (1px)
Channel
Value
1
000 – 255
2 channels mode (2px)
Channel
Value
1
000 – 255
2
000 – 255
Function
White
Function
White 1
White 2
5. - SETUP
DMX address
DMX channels mode
Eye switch ON order
Dimmer curve
Menu lock (PWD: UP-DOWN-UP-DOWN-
ENTER)
Function after DMX fail
Fan mode
Temperature control
Reset to factory defalut
Firmware version
20
Advertisement
Table of Contents
