Maintenance - Sagitter ARCHER B2 User Manual

7 8 10
8 9 11
9 10 12
10 11 13
11 12 14
12 13 15
13 14 16
To ensure optimal performance, the unit must be frequently cleaned. Unplug the device from
the mains and let it cool for at least 35 minutes to avoid the risk of burns. Use a vacuum cleaner
or an air compressor and a soft brush or a lens cloth to remove the dust deposited.
The lenses, like any other damaged part, must be replaced with original spare parts.
In order to preserve the lifespan of the lamp and prevent its breakage, turn OFF the lamp at
least 15 minutes before the projector is completely switched OFF, in order to ensure a proper
cooling down of the lamp by fan ventilation.
Failures caused by not observance of these instructions, will result in the warranty decay.
It is strongly suggested to turn on the lamp, only in cases of concrete need. Keeping the lamp
on without using it, reduces its lifespan and exposes the internal components to overheating
that shortens their lifespan.
176 – 185
186 – 195
196 – 205
206 – 230
231 – 255
8-facet prism 000 – 127
128 – 255
Prism 1 rotation 000 – 127
128 – 190
191 – 192
193 – 255
Linear prism 000 – 127
128 – 255
Prism 2 rotation 000 – 127
128 – 190
191 – 192
193 – 255
Frost 000 – 127
128 – 255
Focus 000 - 255
Special 000 – 024
025 – 049
050 – 074
075 – 099
100 – 124
125 – 149
150 – 174
175 – 199
200 – 224
225 - 255

6. - MAINTENANCE

IMPORTANT !!!
23
Gobo 11 shacking from slow to fast
Gobo 12 shacking from slow to fast
Gobo 13 shacking from slow to fast
Counterclockwise rotation from slow to fast
Clockwise rotation from slow to fast
No prism
Prism inserted
Index rotation
Counterclockwise rotation from fast to slow
Stop
Clockwise rotation from slow to fast
No prism
Prism inserted
Index rotation
Counterclockwise rotation from fast to slow
Stop
Clockwise rotation from slow to fast
No frost
Frost inserted
Focus
No function
Effects reset
No function
Total reset
No function
Sound mode (microphone sensitivity
set by display)
No function
Lamp OFF
No function
Lamp ON