Rev. 01-04/19 INDICE: 1. INTRODUZIONE p. 3 2. ISTRUZIONI DI SICUREZZA p. 4 3. APERTURA CONFEZIONE E CONTROLLO p. 6 4. INSTALLAZIONE ED ACCENSIONE p. 7 5. ISTRUZIONI PER L'USO p. 9 6. MANUTENZIONE p. 15 7. SPECIFICHE TECNICHE p. 15 INDEX: 1.
1. INTRODUZIONE Grazie per avere scelto un nostro prodotto! Vi preghiamo di fare riferimento alle istruzioni e alle avvertenze contenute nel presente manuale per l’utilizzo del dispositivo e di conservarlo per future consultazioni. Il presente manuale contiene informazioni riguardanti l’installazione e l’utilizzo del dispositivo. Le informazioni contenute in questo documento sono state attentamente redatte e controllate.
2. ISTRUZIONI DI SICUREZZA Attenzione! Questo prodotto non è adatto ad un uso domestico. Leggere il presente manuale prima di installare e dare corrente all’apparecchiatura, seguire le precauzioni di sicurezza elencate di seguito ed osservare tutti gli avvertimenti indicati nel presente manuale e stampati sull’apparecchiatura.
Page 5
CLASSE DI PROTEZIONE IP20 Il dispositivo è protetto contro la penetrazione di corpi solidi di dimensioni superiori a 12 mm (0.47”) di diametro (prima cifra 2), ma non contro la caduta di gocce d’acqua, pioggia, schizzi o getti d’acqua (seconda cifra 0). Usare solo in ambienti asciutti.
4. - INSTALLAZIONE ED ACCENSIONE 4.1 - INSTALLAZIONE PRODOTTO - Non scuotere l'apparecchio. Evitare l'utilizzo di forza eccessiva durante le operazioni di installazione o fissaggio dell'unità. - L'unità può essere installata a pavimento in appoggio sugli appositi piedini in gomma, a parete, a soffitto o su truss.
Page 8
4.3 - COLLEGAMENTO ALLA CATENA DMX Utilizzare un cavo conforme alle specifiche EIA RS-485: bipolare intrecciato, schermato, 120Ohm di impedenza caratteristica e bassa capacità (SAGITTER SG DMX3 – SG DMX5). Non utilizzare cavo microfonico o altro cavo con caratteristiche diverse da quelle specificate.
Page 10
900/1000/1100/1200/1300 Frequency /1400/1500/2500/4000/ Impostazione frequenza LED 5000/10K/15K/20K/25K Power Mode Normal/Theatre Impostazione modalità potenza Auto Head fan High Velocità ventola testa Fan Set Base Fan Velocità ventola base Backlight 02-60m Timeout spegnimento schermo Flip Display OFF/ON Inversione display LCD. Set Key Lock OFF/ON Blocco display DispFlash...
Page 11
Temp Info Xxx °C Temperatura proiettore Fan Speed Informazione velocità ventole Error Info Pan, Tilt…. Errori del proiettore Model Info ARCHER S7 Info del modello Software V. Versione software 5.2 – MODALITA' DMX Canale Valore Funzione 24 CH 29 CH 34 CH 000 –...
Page 12
155 – 169 Gobo 6 shake, da lento a veloce 170 – 189 Gobo 7 shake, da lento a veloce 190 – 221 Rotazione ruota Gobo in senso antiorario da veloce a lento 222 – 223 No rotazione 224 – 255 Rotazione ruota Gobo in senso orario da lento a veloce Rotazione Gobo 1 000 –...
Page 13
Ruota animazione 000 – 127 Nessuna funzione 128 – 189 Rotazione oraria da veloce a lento 190 – 193 Nessuna funzione 194 – 255 Rotazione antioraria da lento a veloce Prisma lineare 000 – 031 Nessuna funzione 032 – 255 Prisma lineare inserito Rotazione prisma lineare 000 –...
Page 14
192 – 223 Strobo con effetto random da lento a veloce 224 - 255 Shutter aperto Dimmer 000 – 255 Intensità da 0 % a 100% Dimmer Fine 000 – 255 Intensità dimmer Fine Modalità dimmer 000 – 020 Standard 021 –...
6. - MANUTENZIONE Per garantire ottime prestazioni, l’apparecchio deve essere pulito frequentemente. Scollegare l’apparecchio della corrente e lasciarlo raffreddare per almeno 35 minuti onde evitare il rischio di bruciature. Utilizzare un’aspirapolvere o compressore e una spazzola morbida o un panno per lenti per rimuovere la polvere depositata.
1. - INTRODUCTION Thank You for choosing one of Our products! Please refer to the instructions and warnings contained in this user manual, please retain it for future reference. This manual contains information about the installation and use of the device. The information contained in this publication has been carefully prepared and checked.
2. - SAFETY INSTRUCTIONS Caution! This product is not suitable for household illumination. Please read this manual before installing and applying power to the equipment, follow the safety precautions listed below and observe all warnings in this manual and printed on. Please contact a PROEL distributor for assistance with any questions about how to activate the equipment safely.
Page 18
IP20 PROTECTION RATING The device is protected against the penetration of solid bodies larger than 12 mm (0,47 ") in diameter (first digit 2), but not against dripping water, rain, splashes or jets of water (second digit 0). Use only in dry areas. Inside use only. Do not expose the equipment to rain or moisture. PROTECTION AGAIN ELECTRIC SHOCK The device must be connected to a power supply system with efficient earthing.
4. - INSTALLATION AND SWITCH ON 4.1 - PRODUCT INSTALLATION - Do not shake the device. Avoid the use of too much force during installation or unit fixing. - The unit can be installed on the floor resting on the rubber feet, on the wall, ceiling or on a truss.
Page 21
4.3 – CONNECTION TO THE DMX CHAIN Use a cable conforming to specifications EIA RS-485: pole twisted, shielded, 120Ohm characteristic impedance and low capacity (SAGITTER SG DMX3 – SG DMX5). Do not use microphone cable or other cable with different characteristics than those specified.
Page 23
900/1000/1100/1200/1300 Frequency /1400/1500/2500/4000/50 Frequency setting 00/10K/15K/20K/25K Power Mode Normal/Theatre Power mode setting Auto Head fan High Head Fans setting Fan Set Base Fan Base Fan setting Backlight 02-60m Timeout backlight LCD Flip Display OFF/ON Display reverse LCD. Set Key Lock OFF/ON Display key lock DispFlash...
Page 24
Temp Info Xxx °C Temperature Fan Speed Fans speed information Error Info Pan, Tilt…. Projector errors Model Info ARCHER S7 Model info Software V. Software version 5.2 – DMX MODE Chanel Value Function 24 CH 29 CH 34 CH 000 – 255 Pan Movement 8bit 000 –...
Page 25
190 – 221 Gobo wheel rotation counter clockwise from fast to slow 222 – 223 No rotation 224 – 255 Gobo wheel rotation clockwise from slow to fast Gobo 1 rotation 000 – 127 Gobo rotation index 128 – 189 Gobo rotation counter-clockwise from fast to slow 190 –...
Page 26
Animation wheel 000 – 127 No function 128 – 189 Clockwise rotation from fast to slow 190 – 193 No function 194 – 255 Counter-clockwise rotation from slow to fast Linear Prism 000 – 031 No function 032 – 255 Linear prism inserted Linear prism rotation 000 –...
Page 27
192 – 223 Strobe with random effects from slow to fast 224 - 255 Shutter open Dimmer 000 – 255 Intensity from 0 % to 100% Dimmer Fine 000 – 255 Intensity dimmer Fine Dim Modes 000 – 020 Standard 021 –...
Page 28
6. - MAINTENANCE To ensure optimal performance, the unit must be frequently cleaned. Unplug the device from the mains and let it cool for at least 35 minutes to avoid the risk of burns. Use a vacuum cleaner or an air compressor and a soft brush or a lens cloth to remove the dust deposited. The lenses, like any other damaged part, must be replaced with original spare parts.