Rev. 01-02/16 INDICE: 1. INTRODUZIONE p. 3 2. ISTRUZIONI DI SICUREZZA p. 4 3. APERTURA CONFEZIONE E CONTROLLO p. 6 4. INSTALLAZIONE ED ACCENSIONE p. 7 5. ISTRUZIONI PER L'USO p. 9 6. MANUTENZIONE p. 12 7. SPECIFICHE TECNICHE p. 13 INDEX: 1.
1. INTRODUZIONE Grazie per avere scelto un nostro prodotto! Vi preghiamo di fare riferimento alle istruzioni e alle avvertenze contenute nel presente manuale per l’utilizzo del dispositivo e di conservarlo per future consultazioni. Il presente manuale contiene informazioni riguardanti l’installazione e l’utilizzo del dispositivo.
2. ISTRUZIONI DI SICUREZZA Attenzione! Questo prodotto non è adatto ad un uso domestico. Leggere il presente manuale prima di installare e dare corrente all’apparecchiatura, seguire le precauzioni di sicurezza elencate di seguito ed osservare tutti gli avvertimenti indicati nel presente manuale e stampati sull’apparecchiatura.
Page 5
CLASSE DI PROTEZIONE IP20 Il dispositivo è protetto contro la penetrazione di corpi solidi di dimensioni superiori a 12 mm (0.47”) di diametro (prima cifra 2), ma non contro la caduta di gocce d’acqua, pioggia, schizzi o getti d’acqua (seconda cifra 0). Usare solo in ambienti asciutti.
4. - INSTALLAZIONE ED ACCENSIONE 4.1 - INSTALLAZIONE PRODOTTO - Non scuotere l'apparecchio. Evitare l'utilizzo di forza eccessiva durante le operazioni di installazione o fissaggio dell'unità. - L'unità può essere installata a pavimento in appoggio sugli appositi piedini in gomma, a parete, a soffitto o su truss.
Page 8
4.2 - COLLEGAMENTO ALLA LINEA DI ALIMENTAZIONE Il dispositivo deve essere collegato ad un sistema di alimentazione dotato di un’efficiente messa a terra. Inoltre, si consiglia di proteggere le linee di alimentazione dei prodotti dai contatti indiretti e/o da cortocircuiti verso massa utilizzando interruttori differenziali opportunamente dimensionati.
- ISTRUZIONI PER L'UTILIZZO 5.1 - MAPPA DEL MENU' Menu Funzioni Dettaglio DMX MODE Indirizzo: 001-512 Impostazione indirizzo DMX e ADDR:001 CH:09 Canali (4,6,8,20,24) modalità canali SLAVE Modalità Slave Impostazione modalità Slave MODE AUTO RUN Velocità esecuzione programmi interni: Selezione della velocità di FQN:01 FQN:01-99 esecuzione dei programmi interni...
Page 10
Macro colori Menu & Funzioni Menu & Funzioni Black RGBW 5.2 - MODALITA' DMX Modalità 4 canali ( 0-255 ) ( 0-255 ) ( 0-255 ) ( 0-255 ) Modalità 6 canali 0=ON Master 1-5=Sound dimmer 6-10=ON (000-255) (000-255) (000-255) (000-255) 11-255=Strobe Modalità...
Page 11
Modalità 8 canali ……CH8 ……W 000-015: Dimmer R (0-255) G (0-255) (0-255) 016-023: R 024-031: G 032-039: B 040-047: W 048-055: RG 056-063: GB 064-071: BW 072-079: RW 080-087: GW 088-095: RB 096-103: RGB 104-111: GBW 112-119: RGW 120-127: RBW 000-255 Master 128-135: RGBW...
1. - INTRODUCTION Thank You for choosing one of Our products! Please refer to the instructions and warnings contained in this user manual, please retain it for future reference. This manual contains information about the installation and use of the device. The information contained in this publication has been carefully prepared and checked.
2. - SAFETY INSTRUCTIONS Caution! This product is not suitable for household illumination. Please read this manual before installing and applying power to the equipment, follow the safety precautions listed below and observe all warnings in this manual and printed on. Please contact a PROEL distributor for assistance with any questions about how to activate the equipment safely.
Page 16
IP20 PROTECTION RATING The device is protected against the penetration of solid bodies larger than 12 mm (0,47 ") in diameter (first digit 2), but not against dripping water, rain, splashes or jets of water (second digit 0). Use only in dry areas. Inside use only. Do not expose the equipment to rain or moisture.
4. - INSTALLATION AND SWITCH ON 4.1 - PRODUCT INSTALLATION - Do not shake the device. Avoid the use of too much force during installation or unit fixing. - The unit can be installed on the floor resting on the rubber feet, on the wall, ceiling or on a truss.
Page 19
4.2 - CONNECTION TO THE MAINS The device must be connected to a power supply system with a proper earth system. Moreover, it is recommended to protect power supply lines of the products from indirect contact and / or shorting to earth by using appropriately sized anti electrical shock switch. The electrical connection must be carried out by a qualified electrician.
5. - SETUP 5.1 – MENU Menu Functions Detail DMX MODE Address: 001-512 Set DMX address and channels ADDR:001 CH:09 Channels (4,6,8,20,24) mode SLAVE Slave mode Set Slave mode MODE AUTO RUN Built-in programs speed: Set speed of built-in programs FQN:01 FQN:01-99 STATIC...