Warnings And Notes - Harvia Xenio Instructions For Installation Manual

EN
READ THE WARNINGS AND MANUAL CAREFULLY BEFORE USING
THE PRODUCT!
This user manual is intended for the owner or the person in charge of the product, as well as for
the electrician in charge of the electrical installation of the product. After completing the installation,
the person in charge of the installation should give these instructions to the owner of the product
or to the person in charge of its operation. Please read more instructions for installation, use and
recycling from www.harvia.com. (Original user manual from manufacturer).
INSTALLATION AND MAINTENANCE
• The sauna heater is designed for the heating of a sauna room to bathing temperature. It is
not to be used for any other purpose!
EN
• The control unit is meant for controlling the functions of sauna and a sauna heater. It is
not to be used for any other purpose!
• Note! The control unit is not intended for use in community facilities or for professional use.
• The electrical device may only be connected to the electrical network in accordance with
the current regulations by an authorised, professional electrician. After completing the
installation, the person in charge of the installation should give these instructions to the
owner of the sauna or to the person in charge of its operation.
• All maintenance that requires special skills must be performed by a trained professional.
• Always disconnect the device from the electricity network before carrying out any
maintenance work!
• This device is allowed to use by 8 years old or older children and persons with reduced physical,
sensory or mental capabilities, or persons with lack of experience and knowledge, if they are
supervised or they have been instructed to use the device safely and if they are aware of the
dangers involved. Children should not play with the device. Children should not clean or do
operations to the device without supervision.
• Check the device for visible damage before installing and using the device. Do not use a
damaged device.
• It is absolutely necessary to install the device according to values stated in the instructions of
installation and use. Neglecting them causes a risk of fire.
• If suitable accessories are installed in the device, follow the accessory-specific operating and
installation instructions!
• Clean the product by using a lightly moistened cloth. Use only mild cleaning agents, never
solvents or corrosive chemicals.
• This product should not be disposed of with general household waste. When recycling your
product, take it to your local collection facility or contact the place of purchase.
• The device must be installed in such a way that the warning texts are easy to read after installation.
• The device must not be installed in a wall recess, unless otherwise stated in the instructions.
• Do not place the supply air vent so that the air flow cools the temperature sensor (see
temperature sensor installation instructions!)
• If the supply cord is damaged, it must be replaced by the manufacturers' service person or a
similarly qualified person in order to avoid a hazard.
• Use of a PVC-insulated cable as a connection cable for the heater is prohibited due to its
thermal fragility.
• Do not connect power supply to electric heater via a residual current device.
• If device is connected to water supply, there must be a floor drain on the floor of the sauna room
and/or washroom in case of hose breaks or leaks.
20

WARNINGS AND NOTES