Power Supply And Low Battery - marsden M-160 User Manual

Power Supply and Low Battery

The indicator uses a rechargeable battery pack, a non-rechargeable battery pack, or can be powered from the mains via the AC
adaptor.
Make sure the battery pack is installed in the battery box of the indicator. Alternatively, plug the AC adaptor (12V 2A) into the
port on the side of the indicator.
Installing and Replacing the Battery Pack
Take out the battery housing.
1.
The rechargeable battery pack will slide into, or out of, the housing.
2.
Check that the housing pin is connecting to the right point inside the indicator.
3.
Place the housing back in the back of the indicator and close the battery housing cover.
4.
Page 7 of 20