APRILIA RSV4 ABS 2009 Manual page 419

RSV4 ABS
Check that the following components are in good
conditions:
•
sliding bushing;
•
guide bushing;
•
piston.
If there are signs of excessive wear or damage, replace the affected component.
CAUTION
REMOVE ANY IMPURITY IN THE BUSHINGS, TAKING CARE NOT TO SCRATCH THEIR SUR-
FACE.
Replace the following components with new ones:
•
seal;
•
dust gaiter
•
the two OR on the regulator.
(PROCEDURE FOR SACHS FORKS)
Stem
Check the sliding surface for scorings and/or scratches.
These scorings can be eliminated by rubbing them with wet sandpaper (grain 1).
If the scorings are deep, replace the stem.
Use a dial gauge to check that the stem bending is below the limit value.
If over the value, replace the stem.
CAUTION
Suspensions
SUSP - 419