Advertisement
RSV4 ABS
TABLE F2
35. Insert the fuse-box in the two tongues on the
battery mounting bracket
36. Protection relay and relay socket rubber ring
37. Insert the relay in the plastic tongue on the left
38. TBEI M5x16 screw
39. Battery mounting bracket
40. TBEI M5x16 screw
41. Insert the relay in the plastic tongue on the right
42. Relay and relay socket rubber ring
TABLE F2 BIS
•
Pass the positive battery cable under
the top of the frame.
TABLE F3
43. ECU diagnosis connector
44. Instrument panel diagnosis connector
45. Insert the instrument panel diagnosis and the
ECU diagnosis connectors in their specific seats
46. License plate frame and taillight cable harness
routing
47. Taillight connector
48. License plate frame cable harness connector
TABLE F4
49. Cable grommet
50. Rubber clamp
51. Vehicle cable harness
52. Insert the tape clamp on the cable harness in the hole on the right side of the saddle mounting
53. Starter motor cable
54. M5x8 screw
55. Start-up relay connector
56. Start-up relay
57. Insert the start-up relay in the two plastic tongues
Electrical system
ELE SYS - 139
Advertisement
