Advertisement
RSV4 ABS
44.SIDE STAND SWITCH
45.GEAR SENSOR
46.FRONT CYLINDER PRESSURE SENSOR
47.REAR CYLINDER PRESSURE SENSOR
48.FRONT CYLINDER THROTTLES
49.REAR CYLINDER THROTTLES
50.AIR TEMPERATURE SENSOR
51.Water Temperature Sensor
52.UPPER INJECTORS
53.7SM CONTROL UNIT
54.HAND GRIP POSITION SENSOR
55.ENGINE SPEED SENSOR
56.COIL
57.SPARK PLUG
58.LOWER INJECTORS
59.SECONDARY AIR SYSTEM
60.Lambda probe
61.VARIABLE GEOMETRY CONTROL UNIT (WHERE PROVIDED)
62.VARIABLE GEOMETRY ENGINE
63.ABS CONTROL UNIT
64.FRONT WHEEL SPEED SENSOR
65.REAR WHEEL SPEED SENSOR
66.INERTIA SENSOR PLATFORM
67.aPRC CONTROLS
68.FAN FUSE
Checks and inspections
GENERAL CONCEPTS OF ELECTRICAL TROUBLESHOOTING
THE CONNECTION DIAGRAMS ARE IN THE ELECTRICAL SYSTEM SECTIONS; PAY ATTENTION
TO THESE DIAGRAMS AS THEY SHOW THE CONNECTOR/COMPONENT AS VIEWED FROM
THE CABLE HARNESS SIDE, THAT IS LOOKING AT THE CABLES WHEN GOING OUT OF THE
"MAIN" CABLE HARNESS AND INTO THE CONNECTOR/COMPONENT.
CAUTION
BEFORE CARRYING OUT ANY TROUBLESHOOTING PROCEDURE ON THE VEHICLE, CHECK
THAT THE BATTERY VOLTAGE IS ABOVE 12V.
Electrical system
ELE SYS - 145
Advertisement
